1)
Press and hold “Display Power” button for two seconds
then release it. A small green LED light will blink quickly
for about 30 seconds while the projector warms up.
2)
Connect the video cable to your laptop. Light at video interface
will turn from Orange to Green when done.
***
If you don’t see the expected video output from the projector,
be sure that you press the appropriate function keys on your
laptop***
3)
Projector will function automatically.
Press
and hold “Display Power” button for two seconds
then release it. The green LED will blink very slowly for up
to two minutes while the projector cools down.
The
blue backing lights will also blink at the end of the process.
Do
not touch any other buttons at this time or it will delay the
process.
