Guide to the Records of the Massachusetts Institute of Technology Servomechanisms Laboratory, 1940-1959
AC.0151

Summary Information

Repository
Massachusetts Institute of Technology. Institute Archives and Special Collections
Creator
Massachusetts Institute of Technology. Servomechanisms Laboratory
Title
Massachusetts Institute of Technology, Servomechanisms Laboratory records
ID
AC.0151
Date [inclusive]
1940-1959
Extent
56.0 cubic feet (170 manuscript boxes, 5 oversized flat boxes)
Location
Materials are stored off-site. Advance notice is required for use.
Language
English

Citation

Massachusetts Institute of Technology, Servomechanisms Laboratory Records, AC 151, box X. Massachusetts Institute of Technology, Institute Archives and Special Collections, Cambridge, Massachusetts.

Return to Table of Contents »


Historical note

The Servomechanisms Laboratory was established at MIT in 1940 under the direction of Gordon S. Brown, then assistant professor of electrical engineering. The laboratory grew out of the Department of Electrical Engineering’s increasing attention in the fall of 1939 to servomechanisms, specifically fire control (gun-positioning instruments) in response to a request from the U.S. Navy for a special course for naval fire control officers assigned to MIT. Harold Hazen, head of the department, was also Gordon Brown’s doctoral advisor and asked him to develop the course. The 1939 MIT Course Bulletin lists for the first time two elective classes (6.605 and 6.606) titled Theory and Applications of Servo Mechanisms with Gordon S. Brown as instructor.

During World War II the laboratory’s teams of research scientists and graduate students (who also produced thesis projects from their work) undertook research and development of feedback control systems for the U.S. government (Navy Ordnance, Army Ordnance, and the National Defense Research Committee) as well as commercial contractors. Research included servo-control systems for advanced radar used on U.S. Navy ships. Laboratory director Gordon Brown served as a consultant to the Sperry Gyroscope Company as well as to the War Department.

After World War II ended in 1945, the laboratory’s newly created dynamic analysis and control group, directed by Albert C. Hall, continued to develop automated control systems for U.S. Navy guided missiles. In 1946 this group separated to form the Dynamic Analysis and Control Laboratory at MIT, which closed in 1958.

Early laboratory research, originating in 1944 as the ASCA (Aircraft Stability and Control Analyzer) project to develop a flight training simulator, was directed by Jay W. Forrester with the assistance of Robert R. Everett. The research focus was revised in 1946 to include the design and construction of a high-speed digital computer, and the project was renamed Project Whirlwind. In 1951 Project Whirlwind and its staff were separated from the Servomechanisms Laboratory and assigned to the newly created Digital Computer Laboratory, still under the direction of Forrester. Classified research related to development and use of Whirlwind in research projects was simultaneously carried out in Division 6 of the newly formed Lincoln Laboratory. Jay Forrester was director of both the Digital Computer Laboratory and Division 6, and Robert Everett served in both as assistant director.

Other major postwar efforts of the Servomechanisms Laboratory included the development of automatic controls for the reactor rods and instrumentation system of the first peacetime nuclear reactor, constructed in the late 1940s by the Atomic Energy Commission at the Brookhaven National Laboratory.

A significant postwar project that began in 1949 and continued and evolved through the 1950s was the work that led to numerical control of machine tools. Under a contract with the Parsons Company of Michigan, William M. Pease and James O. McDonough designed an experimental numerically-controlled milling machine which received directions through data on punched paper tape. The first working model of a continuous-path numerically-controlled milling machine was demonstrated in 1952. Further research was then carried out under the sponsorship of the U.S. Air Force. Subsequently, the laboratory’s Computer Application Group, led by Douglas T. Ross, developed the Automatically Programmed Tool Language (APT), an easy-to-use, special purpose programming language. Eventually, APT became the world standard for programming computer-controlled machine tools. The Servomechanisms Laboratory staff actively promoted the introduction and use of numerical control for industrial processes. It sponsored conferences and summer sessions aimed at industry personnel. The development of numerical controls had a profound impact on industry as with the introduction of automated controls it revolutionized the machine tool industry. In 1958, further development of the APT system was turned over to a coordinating group sponsored by the Aircraft Industries Association.

Research activities of the Servomechanisms Laboratory broadened in the late 1950s, and a decision was made in 1959 to change the name of the laboratory to the Electronic Systems Laboratory. The laboratory continued to report to the Department of Electrical Engineering until March 1978, when it became an inter-departmental laboratory reporting to the provost. In September 1978 it was renamed the Laboratory for Information and Decision Systems (LIDS).

Directors of the Servomechanisms Laboratory:

Gordon S. Brown, 1939-1952

William M. Pease, 1952-1953

J. Francis Reintjes, 1953-1959 (1959-1974, director of the successor Electronic Systems Laboratory)

More detailed accounts of the research activities of the Servomechanisms Laboratory can be found in the following publications:

A Century of Electrical Engineering and Computer Science at MIT, 1882-1982, by Karl L. Wildes. Cambridge, Mass.: MIT Press, 1985. Chapters 14 and 17.

Numerical Control: Making a New Technology, by J. Francis Reintjes. New York: Oxford University Press, 1991.

Q.E.D.: M.I.T. in World War II, by John E. Burchard. New York: J. Wiley, 1948.

Return to Table of Contents »


Scope and Contents of the Collection

World War II

The Servomechanisms Laboratory’s beginning years, 1940-1945, coincide with World War II and are partially documented in Series 1, files collected by staff member Robert Everett. Memos, graphs, drawings, and final reports relating to research about and application of feedback control to automate navy and army gun control systems, and development of servo-controls for advanced radar systems are the focus of the series. Also included in Series 1 are reports and writings of George Newton, Donald Campbell, H. Tyler Marcy, and other research staff. The mixture of basic research and war-time applications is also represented in a fuller set of memos, technical reports, and writings in the first five boxes of Series 2. Researchers interested in war-time laboratory projects should check both Series 1 and Series 2. Laboratory computation books contain research notes for war-time projects; as books are arranged alphabetically, check the list for dates 1941-1945 and projects numbered 6409 or lower.

Operational Flight Trainer/Project Whirlwind

Records covering the time span 1947-1954 document one of the laboratory’s major postwar projects, which was directed by Jay Forrester assisted by Robert Everett (project 6345).

The project, originally called the Aircraft Stability and Control Analyzer Project (ASCA) and also known as the “operational flight trainer,” was in development for the Bureau of Aeronautics, U.S. Navy. As the project research moved ahead, its focus moved from the simulator to the development of digital computing and the production of one of the first high-speed digital computers. The project was renamed “Whirlwind.” Many Whirlwind engineering notes, memos, and summary reports are found in boxes 5-10 of Series 2. A useful list, January 1945-April 1952 of R-series, M-series, E-series, and C-series project documents, is located in box 10 of Series 2. Other records relating to Whirlwind can be found in two archival collections, the MIT Digital Computer Laboratory, AC 362, and Project Whirlwind Collection, MC 665.

Brookhaven Nuclear Reactor

Researchers interested in the history of nuclear reactors will also find the Servomechanisms Laboratory collection useful. An important postwar project well represented in Series 2 project files is the Brookhaven Nuclear Reactor Project (#6546) headed by William Pease and Truman Gray. The Servomechanisms Laboratory designed and built controls for the reactor rods and instrumentation of the Brookhaven reactor, the first peacetime nuclear reactor. Principal documents are engineering memos and reports dating from 1947 to 1949. Series 3, computation books, also contains laboratory notes for project 6546.

Numerical Control of Machine Tools

The development of numerical control systems (1949-1959, contract numbers 6694 and 6873) revolutionized the machine tool industry. Research on numerical control development and applications has by far the most extensive and richest documentation in the collection, totaling 30 boxes of reports, computation books, engineering reports, and memos, as well as 5 boxes of technical drawings. Researchers should check Series 2, boxes 26-27 and 52-53, for computation books relating to project 6694, numerical control. Information about the first demonstration of the numerically-controlled milling machine held in September 1952 can be found in Series 2, box 37.

Numerical control research was first sponsored by Parsons Corporation, Michigan (project 6694), then, starting in 1952, by the U.S. Air Force, Air Material Command (project 6873). Numerical control research information is in the following boxes of Series 2: boxes 26-28, 38, 64, and 81-85. Because Series 2 is arranged by project number, information about numerical control research is separated within the list, so both project numbers should be checked. Within the subset of project 6873, files are arranged alphabetically by title. It is advisable to browse all file titles numbered 6873 to understand the full complement of research activities. A summary, project statements, and history can be found in boxes 43 and 48, and the final report in box 85.

Automatic Programming Systems

The later phase of numerical control research in the middle 1950s was done by the laboratory’s Computer Application Group, led by Douglas T. Ross, to develop the Automatically Programmed Tool Language (APT) for the introduction of the APT manufacturing system. APT programming manuals and development reports are located in Series 2, boxes 32-35.

Other

Much of the research in the Servomechanisms Laboratory was carried out by graduate students as part of their thesis work. A list of graduate theses covering the years 1937-1950, located in Series 2, box 80, offers information about thesis projects, and the computation books constituting Series 3 contain data for many different thesis projects. The Institute Archives retains a copy of all master and doctoral degree theses, accessible by name of student or advisor by searching the MIT Libraries’ online catalog.

Economic evaluations of the potential application of research products is located in box 38, Series 2, and texts and documents about the summer course for industry personnel (1954-1955) are in Series 2, boxes 41 and 42. Patents can be found in box 45 of Series 2.

Return to Table of Contents »


Arrangement note

Project reports can be found in both Series 1 and 2. Files kept by Robert R. Everett and transferred to the Institute Archives from MITRE Corporation in 1979 were kept together as Series 1. Other project files, transferred from Laboratory for Information Systems and Design in 2002, are designated as Series 2.

Project files in Series 2 are arranged in the order in which they were kept by the laboratory, by project number assigned by the MIT Division of Industrial Cooperation (DIC). Numbers are assigned chronologically campus-wide as grant contracts are signed, so Series 2 files are roughly in chronological order.

Detailed engineering drawings and wiring diagrams compiled for research project reports are located in Series 2, boxes 28, and 81-85, and can be matched to reports by project number.

A large set of laboratory computation books created by graduate students and laboratory staff was transferred to the Archives in 1980. Books dated from 1940 to 1959 constitute Series 3 of this collection. The original alphabetical arrangement by author, existing at transfer, has been maintained. A small number of computation books relating to the numerical control project were not transferred in 1980 but were part of the transfer of files in 2002. Therefore, researchers should check Series 2, boxes 26-27 and 52-53, for computation books relating to project 6694, numerical control, that were transferred in 2002.

Return to Table of Contents »


Administrative Information

Publication Information

 Massachusetts Institute of Technology. Institute Archives and Special Collections (1987, 2002-2004)

MIT Libraries
Building 14N-118
77 Massachusetts Avenue
Cambridge, Massachusetts, 02139-4307
617.253.5690
mithistory@mit.edu

Revision Description

  2009, 2012

Access note

The collection is open for research.

Intellectual Property Rights

Access to collections in the Institute Archives and Special Collections is not authorization to publish. Separate written application for permission to publish must be made to the Institute Archives. Copyright of some items in this collection may be held by respective creators, not by the creating office.

Return to Table of Contents »


Related Materials

Related Materials

As the work of the Servomechanisms Laboratory broadened in scope, its name was changed in 1959 from Servomechanisms Laboratory to Electronic Systems Laboratory. Records of the Electronic Systems Laboratory constitute a separate but closely related collection (AC 528) and should be consulted by those studying research projects conducted in the mid-to-late 1950s.

Other related collections in the Institute Archives and Special Collections

Gordon S. Brown papers, MC 24 (includes a 1985 oral history)

Walter Rosenblith papers, MC 55 (includes a 1982 oral history of Gordon Brown, Julius Stratton, and Victor Weisskopf)

Computers at MIT Oral History Collection, 1976-1977, MC 131 (Robert R. Everett, Jay W. Forrester, Harold Hazen)

Jay Forrester papers, MC 439 (includes a 1975 oral history)

Harold Hazen papers, MC 106

George Newton papers, MC 239

J. Francis Reintjes papers, MC 489

John E.Ward papers, MC 567

MIT Digital Computer Laboratory records, AC 362

Project Whirlwind Collection, MC 665

MIT Office of Sponsored Programs, grant and contract records, AC 157

Return to Table of Contents »


Controlled Access Headings

Corporate Name(s)

  • Massachusetts Institute of Technology. Servomechanisms Laboratory

Genre(s)

  • Engineering drawings.

Personal Name(s)

  • Brown, Gordon Stanley, 1907-1996
  • Everett, Robert R.
  • Forrester, Jay Wright
  • Reintjes, J. Francis
  • Ross, D.T. (Douglas Taylor)

Subject(s)

  • DIC 6345.
  • Electronic digital computers.
  • Fire control (Aerial gunnery)
  • Fire control (Gunnery)
  • Massachusetts Institute of Technology--History
  • Project Whirlwind.
  • Radar--Antennas--Research.
  • Servomechanisms--Design and construction.
  • Whirlwind computer.

Return to Table of Contents »


Bibliography

Burchard, John E. Q.E.D.: M.I.T. in World War II. New York: J. Wiley, 1948. MIT Libraries.

Reintjes, J. Francis. Numerical Control: Making a New Technology. New York: Oxford University Press, 1991. MIT Libraries.

Wildes, Karl L. A Century of Electrical Engineering and Computer Science at MIT, 1882-1982. Cambridge, Mass.: MIT Press, 1985. MIT Libraries.

Guttag, John, editor. The Electron and the Bit: EECS at MIT, 1902-2002. MIT, Department of Electrical Engineering and Computer Science, 2005.

Return to Table of Contents »


Collection Inventory

 Series 1. Project Files of Robert R. Everett 1941-1947 

Box

Project DIC #6179: Fuze Setter. Tests and Recommended Modifications of the T 33 Fuze Setter 1943 

1

Project DIC #6043 (Hydraulic Transmissions, A-2 Antenna): Dodd, Stephen H., Jr., Design and Test of a Hydraulic Transmission 1945 

1

Project DIC #6043: Dodd, Stephen H., Jr., memorandums 1943-1944 

1

Project DIC #6043: Dodd, Stephen H., Jr., notes and graphs of the XP-1 and XP-2 Variable Stroke Axial Pump undated 

1

Project DIC #6043: Memorandums B-T 1943-1945 

1

Project DIC #6043: Pilot Model SG 3 Servos, drawings 1944 

1

Project DIC #6043: Pilot Model SG-3 Servos, list of drawings as built by Westinghouse Brake 1944 

1

Project DIC #6043: Pilot Model SG-3 Servos, Operating Instructions 1944 

1

Project DIC #6043: Pilot Model SG-3 Servos, parts lists 1944 

1

Project DIC #6043: Summary of the Engineering Data of the Antenna Hydraulic Servo Units Designed for the Raytheon Manufacturing Co. 1945 

1

Project DIC #6043: Weekly Work Reports from Division T 1943-1944 

2

Project DIC #6152: Hydraulic Transmissions, Oilgear. Automatic Control Characteristics of a .682 Cubic Inch Per Revolution Oilgear Hydraulic Transmission 1943 

2

Project DIC #6469: Power Drives. Power Drive for Navy Wing-Tip Turret 1947 

2

Project DIC #6041: Remote Control Systems. Description and Operating Instructions of the Sperry MIT Automatic Remote Control Systems for the T-36 Gun Motor Carriage 1942 

2

Project DIC #6041: Remote Control Systems. Description and Operating Instructions of the Remote Control System T-8 for the T-62 Gun Motor Carriage 1942 

2

Project DIC #6047: Remote Control Systems. Description and Operating Instructions of the Sperry Automatic Remote Control System T-15 for 37 mm and 40 mm Carriage 1942 

2

Project DIC #6047: Remote Control Systems. Installation Instructions for the T-29 Director with the T-15 Remote Controls 1942 

2

Project DIC #6047: Remote Control Systems. Studies on the Remote Control Systems M-1 and M-5 1942 

2

Ahrendt, W. R., Analysis of Resistance - Capacitance Null Circuits 1945 

2

Campbell, Donald P., A Discussion of the Decibel Log Frequency Methods of Analysis and Synthesis of Automatic Control System Behavior 1945 

2

Newton, George C., MIT Servomechanisms Laboratory, Council on Symbols, Manual of Schematic Diagrams 1941 

2

Nichols, Nathaniel B., Hydraulic Transmission Theory 1942 

2

Marcy, H. Tyler, Parallel Circuits in Servomechanisms 1946 

2

Marcy, H. Tyler and Irving H. Van Horn, Jr., Factors Limiting the Load Inertia of a Servomechanism 1942 

2

Van Horn, Irving H., Jr., Studies of .341 Cubic Inches Per Revolution Oilgear Hydraulic Transmission and Stroke Control 1946 

2

Return to Table of Contents »


 Series 2. Project Files 1940-1959 

Box

Project 5955A, Report, "The Development of MIT Torque Motors for the Period March 1941 to March 1942"  1941-1942 

1

Project 5955A, Memorandum, "Tests to Determine Characteristics of an Hydraulic Power Transmission"  1941 June 24 

1

Project 6041, Report, "Automatic Remote Control Systems for the T-35 Gun Motor Carriage"  1942 August 11 

1

Project 6041, Report, "Description and Operating Instructions for Remote Control System T-8 for the T-62 Gun Motor Carriage"  1942 November 23 

1

Project 6043, Report, "SG3 Antenna Stabilizing System, Advanced Technical Release"  1944 April 

1

Project 6043, Report, "Antenna Hydraulic Servo Units Designed for Raytheon Manufacturing Company"  1945 March 

1

Project 6043, Report, "Design and Test of a Hydraulic Transmission for Raytheon Manufacturing Company"  1945 

1

Project 6043A, Report, "Preliminary Report – Investigation of Causes of ‘Spoking’ in Raytheon Remote PP1 (VD-2)"  1944 October 10 

1

Project 6047, Memorandum, "Cold Tests on Two Oil Units for 40 M/M Gun"  1942 July 29 

1

Project 6047, Report, "Description and Operating Instructions – Sperry MIT Automatic Remote Control System T-15 for the 37 MM and 40 MM Cartridges"  1942 August 31 

1

Project 6047, Report, "Supplement to Instruction Guide – Remote Control System M-1"  1942 September 28 

1

Project 6047, Report, "Report of Studies on the Remote Control Systems M-1 and M-5"  1942 November 

1

Project 6047, Report, "Installation Instruction for the T-29 Director with the T-15 Remote Controls"  1942 December 7 

1

Project 6047, Report, "Report on Remote Control System T-15"  1943 June 1 

1

Project 6060, Technical Note 57-159, "Gradient Methods for the Computer Solution of System Optimization Problems"  1957 September 

2

Project 6097, Report, "Instruction Manual – Servomechanism for 90 MM Combination Fuze-Setter, Rammer T7"  1943 February 1943 

2

Project 6117, Report, "Description and Operating Instructions for the Oil Gears M3B1 When Used with the Remote Control System M9 or M10"  1943 March 1 

2

Project 6117, Report, "Specifications and Test Procedure for Oil Gear M3"  1943 May 4 

2

Project 6132, Report, "Description and Operating Instructions for the Remote Control System T6E1 When Used with the 75 MM Gun Carriage T8E1"  1943 March 16 

2

Project 6145, Report, "Description and Operating Instructions for Control System and Oil Gears M3B1 as Modified for T-65-1 Gun Carriage, Preliminary"  undated 

2

Project 6145, Report, "Description and Operating Instructions for Control System and Oil Gears M3B1 as Modified for T-65 Gun Carriage Motor"  1943 October 

2

Project 6146, Report, "On-Carriage Manually-Controlled Power Drive System for a 40 MM Antiaircraft Gun Mount"  1943 November 25 

2

Project 6146, Report, "Notes on Installation and Operation of 7-10 Drive Controller as a Local Control System for 40 MM. Gun M2 with Oil Gears M3"  1944 March 

2

Project 6151, Report, "Report on DIC Project 6151"  1943 September 28 

2

Project 6152, Report, "Automatic Control Characteristics of a 0.682 Cubic Inch Per Revolution Oilgear Hydraulic Transmission"  1943 June 

2

Project 6152, Report, "Variable-Speed A-C Operation of a Stunt Motor"  1943 October 

2

Project 6152, Report, "Notes on Materiel – Description and Operating Instructions for the ‘Servotraverse’ Mechanism for Medium Tanks M4 and Modifications"  1943 December 

2

Project 6152, Report, "Experimental and Design Studies of the Servotraverse Mechanism for Medium Tanks M4 and Modifications"  1944 February 

2

Project 6168, Report, "Development of a Servo Control System for Guided Missiles – Preliminary Report"  1945 July 2 

3

Project 6168, Report, "Development of a Servo Control System for Guided Missiles"  1945 October 31 

3

Project 6172, Report, "Description and Operating Instructions for Experimental Navy Quad Mount Director"  1945 July 23 

3

Project 6175, Report, "Report on Tests on Army Director Mount T75 Equipped with T30B1, T30B2 and T4E1 Sights"  1943 November 12 

3

Project 6179, Report, "Tests and Recommended Modifications of Fuze Setter, 733"  1943 June 21 

3

Project 6182, Report, "Report on Work Performed Under OSRD Contract OEMsr 1167"  1944 July 11 

3

Project 6198, Report, "Description and Operating Instructions for H2K Indicator Servo"  1944 April 

3

Project 6206, Report, "Description and Operating Instructions for An/APS-I Indicator Servo"  1944 February 3 

3

Project 6208, Report, "Life Test Studies on Oil Gears M3B1"  1943 November 

3

Project 6208, Report, "Installation and Alignment of Oil Gears M3 – 40MM, Antiaircraft Gun Material M2"  1944 January 17 

3

Project 6209, Report, "Description and Operating Instructions for Drive Controller T-14 and Modified Oil Gears M3B1 on T-65-E1 Gun Motor Carriage"  1943 December 

3

Project 6209, Report, "Description and Operating Instructions for Drive Controller T-14 and Modified Oil Gears M3B1 on Gun Mount T-98"  1944 March 

3

Project 6219, Report, "Report of Test on Slide Block Bearing Assembly of M3 Oilgear"  1944 January 15 

3

Project 6219, Report, "Description of Local-Remote Power Control System for 40 MM. Gun Mount M3"  1944 August 

3

Project 6221, Report, "Investigation of Power Drives for Gun Director, MK 49"  1945 May 

3

Project 6234, Report, "Description of Servo-Stabilized 40 MM. Power Drive for Single 40 MM. Gun Mount M3"  1944 August 

4

Project 6234, Report, "Report on Development of Servo Stabilized Drive for Single 40 MM Gun Mount and Adaptation of the Drive to Remote Control"  1945 August 

4

Project 6234, Report, "Performance Specifications for Servo Stabilized 40 MM. Power Drive"  1945 October 2 

4

Project 6235, Report, "Report on the Investigation of Field Troubles Encountered in Fuze Setter Amplifier M1A1"  1945 July 6 

4

Project 6248, Report, "Feasibility of an On-Carriage Lead-Computing Sight for the 90 MM Antiaircraft Gun"  1944 September 

4

Project 6256, Report, "Description and Operation of the Stabilized Damper System and the Stabilized Power Tracking System for Handstand Directors"  1945 January 29 

4

Project 6269, 6270, 6271, Report, "40 MM Gun Carriage M241 Equipped with MK 14 Gun Sight, T23 Drive Controller, T1E1 Target Selector, and an M3E1 Azimuth Oil Gear"  1945 June 20 

4

Project 6288, Report, "Specifications for Pilot Models of Servotraverse Mechanism, Model #2 for the Heavy Turret"  1945 January 20 

4

Project 6288, Report, "Requirements of a Tank Stabilization System"  1945 March 6 

4

Project 6288, Report, "Description of Stroke Control for Elevating Mechanism"  1945 September 14 

4

Project 6288, Memorandum, "Compensatory Network for Power Cylinder Elevating Mechanism"  1946 January 6 

4

Project 6288, Report, "Description and Operating Instructions for MIT Fire Control System for the Heavy Tank T29"  1946 May 

4

Project 6288, Report, "The Open Cycle Frequency Response Tests of the Heavy Tank T29 Elevating Mechanism"  1947 May 13 

4

Project 6295, Report 22, "Preliminary Investigation of Summing Circuits"  1945 February 22 

4

Project 6295, Report 44, "Detectors, Phase-Sensitive, Full-Wave"  1945 April 20 

4

Project 6305, Memorandum, "Amplidyne Tests – Summary of"  1946 January 25 

5

Project 6305, Report, "Manual of Operation and Maintenance Instructions for the Modified A-31 Aircraft Turret"  1947 January 1 

5

Project 6345, Engineering Note E-84, "Model Two Crystal Tester"  1947 December 16 

5

Project 6345, Engineering Note E-121, "Gate and Delay Unit"  1948 May 14 

5

Project 6345, Engineering Note E-126, "Scope Synchroniser"  1948 July 21 

5

Project 6345, Engineering Note E-137, "Performance of Chains of Gate Tubes"  1948 August 5 

5

Project 6345, Engineering Note E-144, "Basic Circuits – Revisions"  1948 September 16 

5

Project 6345, Engineering Note E-232, "Results of Tests of RT47, RT47-1 and RT-50, Beam-Analyzer Tubes"  1949 May 2 

5

Project 6345, Engineering Note E-245, "Calculation of Correlation Functions by WWI"  1949 June 1 

5

Project 6345, Engineering Note E-264, "The History of the Development of High-Vacuum, Hot-Cathode, Electrostatic Electron Guns"  1949 July 25 

5

Project 6345, Engineering Note E-281, "Multivibrator Frequency Divider"  1949 August 22 

5

Project 6345, Engineering Note E-317, "Flip-Flop Balance Checking in WWI"  1950 February 23 

5

Project 6345, Engineering Note E-323, "Standard Operating Conditions for 100-Series Whirlwind Electrostatic Storage Tubes"  1950 January 19 

6

Project 6345, Engineering Note E-328, "Pulse Transformers and Interstage Coupling in Whirlwind I"  1950 Januar 31 

6

Project 6345, Engineering Note E-329, "Techniques for Using Standard Automatic Subroutines"  1950 February 10 

6

Project 6345, Engineering Note E-337, "Accelerated Life Test for Cathode Interface in Receiving Type Tubes (A paper presented at the MIT Conference on Physical Electronics, March 30, 1950)"  1950 April 3 

6

Project 6345, Engineering Note E-338, "Test Results of L9B and F8B Productions of TAD7 Tubes"  1950 April 11 

6

Project 6345, Engineering Note E-345, "The Transition Region between Negative and Positive Regions of Storage Tube Surfaces"  1950 June 15 

6

Project 6345, Engineering Note E-352, "Compensation of Deflection Defocusing in Storage Tubes"  1950 June 15 

6

Project 6345, Engineering Note E-356, "Equipment and Techniques for Inserting Information into WWI"  1950 July 12 

6

Project 6345, Engineering Note E-380, "Operation of Interim Tape Reader Equipment"  1950 September 12 

6

Project 6345, Engineering Note E-392, "Crystal Diode Investigation – Initial Results"  1950 November 2 

6

Project 6345, Engineering Note E-393, "Marginal Checking System, WWI"  1950 December 2 

6

Project 6345, Engineering Note E-395, "Cathode Interface Impedance and its Effects in Aged Vacuum Tubes (Paper delivered at conference on electron tubes for computers in Atlantic City, New Jersey, December 11, 12, 1950)"  1951 January 2 

6

Project 6345, Engineering Note E-396, "Crystal Diode Life Experience in WWI Computer Circuits (Paper delivered at conference on electron tubes for computers in Atlantic City, New Jersey, December 11, 12, 1950)"  1951 January 2 

6

Project 6345, Engineering Note E-397, "Some Basic Relay Pulse Circuits of General Interest"  1951 January 18 

6

Project 6345, Engineering Note E-400, "Vacuum Tube Pulse Current Tester"  1951 March 15 

6

Project 6345, Engineering Note E-406, "Preliminary Tests on the Four-Core Magnetic-Memory Array"  1951 June 18 

7

Project 6345, Engineering Note E-407, "Electrolytic Corrosion as a Possible Future Source of Trouble Affecting WWI Reliability"  1951 June 25 

7

Project 6345, Engineering Note E-408, "Transistor Conference, June 12, 1951"  1951 July 3 

7

Project 6345, Engineering Note E-410, "The Complimentary Circuit Method for Determination of Interface Resistance"  1951 July 23 

7

Project 6345, Memorandum M-62, M-63, M-64, M-66, M-69, M-76, "Lectures by Project Whirlwind Staff on Electronic Digital Computers"  1947 March and April 

7

Project 6345, Memorandum M-77, "Use of a D.C. Restorer Circuits as a Means of Eliminating D.C. Coupling in Digital Computer Circuits"  1947 May 28 

7

Project 6345, Memorandum M-103, "Gate-Tube Development"  1947 September 17 

7

Project 6345, Memorandum M-207, "Meeting of Electronics Group, January 7, 1948"  1948 January 9 

7

Project 6345, Memorandum M-769, "Tube Characteristic Drawings"  1949 February 1 

7

Project 6345, Memorandum M-788-1, "Suggestions for Mental or Manual Binary Conversion"  1949 February 16 

7

Project 6345, Memorandum M-969, "Accelerated Life Test for Cathode Interface"  1950 January 19 

7

Project 6345, Memorandum M-1000, "A Proposed Binary to Analog Convertor"  1950 March 6 

7

Project 6345, Memorandum M-1020, "Conference on Automatic Computing Machinery, Rutgers University (March 28-29, 1950)"  1950 April 6 

7

Project 6345, Memorandum M-1036, "The Differential Analyzer Approach in Digital Computers"  1950 May 3 

8

Project 6345, Memorandum M-1038, "Checking the Holding Ability of Flip-Flops"  1950 May 9 

8

Project 6345, Memorandum M-1045, "Data on Electron Gun Currents in MIT Storage Tubes"  1950 May 18 

8

Project 6345, Memorandum M-1056, "Development of Type SR-1047 Vacuum Tubes: Tests on Lots D-2 and C-9674"  1950 June 20 

8

Project 6345, Memorandum M-1226, "Additions to Project Reports of Current Interest, Report R-173-1"  1951 June 8 

8

Project 6345, Memorandum M-1247, "The Electronic Temperature of Oxide Cathodes – Methods of Measurements and Results by Robert Champeix, Doctor of Engineering, Laboratory Heud, The Society La Radiotechnique"  1951 July 19 

8

Project 6345, Memorandum M-1252-M-1484, "Project Whirlwind – Bi-Weekly Reports"  1951 August 6 to 1952 May 9 

8

Project 6345, Memorandum M-2741, "Operating Procedure for CSII"  1954 April 21 

9

Project 6345, Report L-3, "Forecast for Military Systems Using Electronic Digital Computers"  1948 September 17 

9

Project 6345, Report R-129, "Conversion of Shaft Position to Binary Code"  1947 October 15 

9

Project 6345, Report R-133, "Timing of Whirlwind I"  1947 December 15 

9

Project 6345, Report R-142, "Talk Delivered by Jay W. Forrester at UCLA"  1948 July 29 

9

Project 6345, Report R-172, "The Study of Non-Linear Servomechanisms with the Aid of an Automatic Digital Computer"  1949 September 26 

9

Project 6345, Report R-177, "A Method of Test Checking an Electronic Digital Computer"  1950 March 15 

9

Project 6345, Report R-185, "Marginal Checking: Preventive Maintenance for Electronic Equipment"  1950 April 27 

9

Project 6345, Report R-193, "Selected Descriptive Material – Whirlwind I Computer – Volume 1 of 2: General"  1950 November 10 

9

Project 6345, report, "The Digital Computation Program at MIT"  1949 September 

9

Project 6345, Report, "List of R-Series Reports, List of M-Series Memorandums, List of E-Series Memorandums, List of C-Series Memorandums"  1945 January 9 to 1952 April 24 

10

Project 6378, Report, "Tests Made on the Sperry Antenna Assembly of the Apb-16 System"  1946 July 12 

10

Project 6383, Memorandum, "Apparatus for Performing Frequency Response Tests on Servomechanism"  1946 October 25 

10

Project 6383, Memorandum, "Radar Characteristics"  1947 January 3 

10

Project 6383, Memorandum, "Method of Designing Networks for Combined Proportional-plus-Integral-plus Lead Control"  1947 May 23 

10

Project 6383, Engineering Memorandum 1-383, "Matching Lead Controllers and Quadratic Integral Controllers using RC Elements Only"  1947 June 18 

10

Project 6409, Engineering Report 2, "Armature Inductance Compensation in a Direct Current Motor"  1946 July 19 

10

Project 6409, Engineering Report 4, "Current Response for Inductively Loaded Thyratron Reactifier"  1946 October 14 

10

Project 6409, Engineering Report 5, "Servomechanisms Using Thyratron-Controlled D-C Motor"  1947 April 4 

10

Project 6409, Engineering Report 6, "Test of 0.5 HP D-C Motor with Stator Pole-Face Compensating Winding"  1947 April 1 

10

Project 6409, Engineering Report 7, "Final Report on Servomechanism Using Thyratron-Controlled D-C Motor"  1947 June 

10

Project 6409, Engineering Report 8, "The Dynamic Characteristics of a D-C Motor with Quadrature-Axis Compensation to Reduce Armature Inductane"  1947 July 28 

10

Project 6444, Report, "Universal Plastics Testing Machine – Summary, PMMA-MIT Plastics Research Project"  1947 May 

10

Project 6469, Engineering Report E-1, "Navy Wing Tip Turret Program – Vibration Study"  1946 November 1 

11

Project 6469, Engineering Report E-2, "Test of Bendix, 2 Phase, 400 cps, Induction Motor, CK 3000-1-A"  1946 November 21 

11

Project 6469, Engineering Report E-4, "Test of Bendix 2 Phase 400 Cycle Induction Motor CK 2000-1-A"  1947 April 15 

11

Project 6469, Engineering Report E-5, "Report on the Design and the Preliminary Testing of a Homopolar Servomotor"  1947 May 1 

11

Project 6469, Engineering Report E-9, "Static Tests of Homopolar Servomotor"  1947 July 29 

11

Project 6469, Engineering Report E-10, "Summary of Induction Motor Characteristics"  1947 August 11 

11

Project 6469, Engineering Report E-11, "Power Drive for navy Wing-Tip Turret"  1947 August 11 

11

Project 6469, Engineering Report E-12, "Three-Phase Commutating Generator"  1947 August 20 

11

Project 6469, Engineering Report E-13, "System Design for Navy Wing Tip Turret"  1947 September 24 

11

Project 6495, Engineering Report 1, "Recommendations for a Servo Development Program Originally Proposed by Toledo Scale Co."  1947 January 6 

11

Project 6506, Classified Receipts 

12

Design of Fire-Control Systems, by George F. Floyd, Jr. and Robert H Eisengrein 1950 June 

12

Project 6506, Engineering Report Nos. 1, 2, 3, 5, 6, 7, 8, 10, 13, 14, 15 

12

Project 6506, Engineering Report 9, Volume II, "Design of a Rate-Stabilized Computer Mount"  1948 February 10 

12

Project 6506, Engineering Report 13, "Design and Performance of the Turret Servomechanism for the Model C, A-1 Fire-Control System"  1949 October 18 

12

Project 6506, Engineering Report 16, "Analysis and Synthesis of Contractor Servomechanisms"  1949 September 1 

12

Project 6506, Engineering Report 17, "Measurement and Analysis of Noise in a Fire-Control System"  1949 October 4 

13

Project 6506, Engineering Report 18, "Phase Lead for A-C Servo Systems with Unregulated Carrier"  1949 September 

13

Project 6506, Engineering Report 19, "A Note on the Synthesis of Conditionally Stable Feedback Systems"  1950 March 17 

13

Project 6506, Engineering Report 21, "Design of an Integral Filter Unit to Reduce Noise Saturation Effects in the Radar-Error Amplifier of the A-1 Fire Control System"  1950 May 8 

13

Project 6506, Engineering Report 22, "A Compensating Network Theory for Feedback-Control Systems Subject to Saturation"  1950 June 5 

13

Project 6506, Engineering Report 23, "Magnetron Operation in the A1 Fire-Control System"  1950 July 18 

13

Project 6506, Engineering Report 24, "Investigation of Some Design Fundementals of the Magnetic Particle Clutch"  1950 July 15 

13

Project 6506, Engineering Report 25, "Investigation of a Flow-Valve Operating from a Constant-Volume Hydraulic Supply"  1950 November 15 

13

Project 6506, Engineering Report 26, "Direct-Writing Oscielograph"  

13

Project 6506, Engineering Report 27, "Design Investigation of Magnetic-Particle Clutch"  1950 December 13 

13

Project 6506, Engineering Report 28, "Error Coefficients in Sevomechanisms"  1951 April 2 

13

Project 6506, Engineering Report 29 

14

Project 6506, Engineering Report 30, "Design of Instrument Servos for Evaluation of A-2 Fire-Control System"  

14

Project 6506, Engineering Report 31, "Control of the A-1 Fire-Control System Turret by Elements of the G. E. Central-Station Fire-Control System"  1951 May 14 

14

Project 6506, Engineering Report 32, "The Mechanical Correlation Computer"  1951 October 11 

14

Project 6506, Engineering Report 33 

14

Project 6506, Engineering Report 34, "Theory and Operation of the MIT Servomechanisms Laboratory Sine-Drive"  1951 November 30 

14

Project 6506, Engineering Report 35, "A Magnetic Amplifier Controller for a Power Servomotor"  1951 December 1 

14

Project 6506, Engineering Report 36, "A Study of Magnetic Amplifier Model Theory"  1952 January 15 

14

Project 6506, Engineering Report 37 

14

Project 6506, Engineering Report 38, "Quick Methods for Evaluating the Closed-Loop Poles of Feedback-Control Systems"  1952 March 24 

14

Project 6506, Engineering Report 39, "Implementing the Statistical Study of Control Systems"  1952 July 22 

14

Project 6506, Engineering Report 40, "Instruction Manual for Data Repeater System Model 4"  1952 May 16 

14

Project 6506, Engineering Report 41, "Performance of an A-2 Fire-Control System with Modified Electronics and Compensating Networks"  1952 July 18 

15

Project 6506, Engineering Report 42, "A Proposed Basis for Specifying the Performance of a Fire-Control System"  1953 April 8 

15

Project 6506, Engineering Report 43, "Preliminary Investigation of the Magnetic-Fluid Clutch as a Servomechanisms Component"  1949 February 18 

15

Project 6506, Engineering Report 44, "Deteminiation of Dynamic Characteristics of a Magnetic-Fluid Clutch"  1949 February 18 

15

Project 6506, Engineering Report 45, "Design of An Eight-Pole Magnetic-Matrix Switch"  1953 July 31 

15

Project 6506, Engineering Report 6506-ER-46, "An Introduction to the Use of Air-Mass Ballistic Tables in Airborne Fire-Control System Evaluation"  1953 July 27 

15

Project 6506, Engineering Report 47, "A Modified Cine Special-II Camera For In-Air Tracking Measurements"  1953 September 1 

15

Project 6506, Engineering Report 6506-ER-48, "Comparison of Two High-Power Servo Breaks"  1953 September 15 

15

Index of Engineering Reports 6506, 6409, 6469 

15

Project 6506, Engineering Memorandum 1, "Summary of Bendix Ay-101D Autosyns with emphasis on their application to the XB-45 system"  1947 February 14 

16

Project 6506, Engineering Memorandum 2, "Compensation of the XB-45 Fire Control System"  1947 March 17 

16

Project 6506, Engineering Memorandum 3, "Radar Gimbal System of XB-45 Fire Control System"  1947 July 15 

16

Project 6506, Engineering Memorandum Nos. 4, 6, 7, 8, 9, 10, 11, 12, 15, 16, 17, Appendix A 

16

Project 6506, Engineering Memorandum 5, "Abstracts Listed under Servomechanisms in the Index to the Bibliography of Scientific and Industrial Reports, Vols. 1, 2, 3, January 1946 to December 1946"  1948 June 24 

16

Project 6506, Engineering Memorandum 11, "Effect of Incorrect Radar Calibration Constants on Results Obtained in Noise Studies"  1948 December 17 

16

Project 6506, Engineering Memorandum, "Abstracts Listed under Servomechanisms in the Index to the Bibliography of Scientific and Industrial Reports, Vol. 4, January 1946 to December 1946"  1948 July 15 

16

Project 6506, Engineering Memorandum 13 1/2, "Optimum Design of Home Brew"  1949 September 16 

16

Project 6506, Engineering Memorandum 14, "Bounding the transient response; continuation of Modification of Wiener-Lee filter theory for automatic control applications"  1949 September 7 

16

Project 6506, Engineering Memorandum 19, "Handbook, Maintenance Instructions, Radar Set AN/APG-27 (a-1 Fire-Control System) CO AN 16-30APG27-3"  1950 October 26 

16

Project 6506, Engineering Memorandum 20, "A Proposal for Optimizing the Performance of Servomechanisms by Continuous Variation of System Parameters in Accordance with the Character of the Input"  1950 November 21 

16

Project 6506, Engineering Memorandum 21, "The Emerson Combined Range and Synchronizer Panel for A-2 Fire-Control Systems"  1951 April 5 

16

Project 6506, Engineering Memorandum 22, "An Analytical Investigation to Determine the Feasibility of Constructing a 10 HP Magnetic-Particle Clutch"  1951 May 11 

16

Project 6506, Engineering Memorandum 24, "Fort Heath Tracking Records of the MIT Model-C Fire-Control System"  1951 November 6 

16

Project 6506, Engineering Memorandum 25, "Mirror Servo Gimbaling Errors"  1951 December 11 

16

Project 6506, Engineering Memorandum 26, "Report of Progress in the Investigation of the Characteristics of a Water Cooled Cylindrical Magnetic Particle Clutch and Recommendations for Future Investigation"  1952 January 14 

16

Project 6506, Engineering Memorandum 27, "Comparison of Three Basic Types of Compensation for Electric Servomechanisms"  1953 June 30 

16

Project 6506, Report, "Summary of Reports and Memorandums Concerning the A-1 Fire Control System from 15 April 1948-14 April 1949"  1948 April to 1949 April 

16

Project 6506, Miscellaneous 1950-1953 

17

Project 6506, Report, "A Proposed Basis for Specifying the Performance of a Fire-Control System"  1947 May 21 

17

Project 6506, Report, "Preliminary Investigation of the Magnetic-Fluid Clutch as a Servomechanisms Component"  1949 February 18 

17

Project 6506, Project Notes, Volume V, No. 9 1950 October 1 

17

Project 6506, Progress Report 1950 October 10 to 1951 November 30 

17

Theory and Design of the A-1 Fire-Control System, Emerson Electric Armament Department 1950 January 

18

Project 6515, Engineering Report 1, "Servo Performance of a Toledo Scale Company Torque Amplifier, Model TA-1"  1947 August 29 

18

Project 6515, Engineering Report 2, "Microsyn Pickoff for Toledo Scale Company Torque Amplifier, Model TA-1"  1947 June 13 

18

Project 6515, Engineering Report 3, "Electronic Unit for Toledo Scale Torque Amplifier, Model TA-1"  1947 September 29 

18

Project 6545, Final Engineering Report, "Investigation of an Airplane Control Boost"  1948 February 13 

19

Project 6546, Control Value Life Tests 1948 May 11 

19

Project 6546, Drawing List (3 November 1948), Revised 1949 August 15 

19

Project 6546, Engineering Memorandum 2, "Column Loads for Support Structure"  1947 October 20 

19

Project 6546, Engineering Memorandum 4, "Coasting Time of Flywheel for Emergency Rod Operation"  1947 November 4 

19

Project 6546, Engineering Memorandum 5, "Flywheel Support Bearings"  1947 November 13 

19

Project 6546, Engineering Memorandum 6, "Design Change in Support Structure"  1947 November 12 

19

Project 6546, Engineering Memorandum 7, "Tentative Nomenclature for Pile Equations"  1947 November 20 

19

Project 6546, Engineering Memorandum 15, "Revised Nomenclature for Pile Equations"  1947 December 9 

19

Project 6546, Engineering Memorandum 21, "Starting Characteristics of Three Horsepower Motor"  1947 December 29 

19

Project 6546, Engineering Memorandum 23, "Control Room Lighting"  1947 December 22 

19

Project 6546, Engineering Memorandum 24, "Energy Requirements of Test Flywheel Setup"  1947 December 23 

19

Project 6546, Engineering Memorandum 36, "Galvanometer Circuits"  1948 January 18 

19

Project 6546, Engineering Memorandum 41, "Results of Tests Performed on Weston Model 705 Sensitrol Relay"  1948 February 4 

19

Project 6546, Engineering Memorandum 42, "Emergency Shut Down and Alarm System"  1948 February 2 

19

Project 6546, Engineering Memorandum 43, "List of Unclassified and Restricted Reports"  1948 February 5 

19

Project 6546, Engineering Memorandum 44, "Starting Characteristics of Three Horsepower Century Motor"  1948 February 6 

19

Project 6546, Engineering Memorandum 46, "Control Circuits for Regulator Rod #1"  1948 February 6 

19

Project 6546, Engineering Memorandum 66, "Inspection Test on Square D Company Pressure Switches"  1948 April 15 

19

Project 6546, Engineering Memorandum 81, "Operating Characteristics of Clare Type ‘M’ Relay"  1948 May 13 

19

Project 6546, Engineering Memorandum 88, "Operating Characteristics of Allen-Bradley Company Bulleting 200, Type 498556 Relay"  1948 May 19 

19

Project 6546, Engineering Memorandum 90, "Tests to be Performed on (a) Regulating Rod Position Indicators, and (b) Emergency Rod Position Indicators"  1948 May 26 

19

Project 6546, Engineering Memorandum 102, "Leakage Resistance Measurements"  1948 June 29 

19

Project 6546, Engineering Memorandum 129, "Operative Characteristics of Struthers-Dunn 112XAX174 Relay"  1948 September 24 

19

Project 6546, Engineering Reports 1947-1949 

20

Project 6546, Engineering Report 1, "Preliminary Procedures for the Writing of Reports and Memorandums"  29 August 1947 

20

Project 6546, Engineering Report 2, "Slippage of Motor in Transmitter-Motor Synchro System with Step Velocity Applied to Transmitter"  1947 October 9 

20

Project 6546, Engineering Report 5, "Grid Current Determination"  1948 January 28 

20

Project 6546, Engineering Report 6, "Characteristics of Diehl Motor Type FPE 25-11"  1947 December 17 

20

Project 6546, Engineering Report 8, "Design and Analysis of Control Rod Support Structures"  1947 December 24 

20

Project 6546, Engineering Report 9, "Friction Coefficient between Graphite and a Metal Surface"  1948 January 14 

20

Project 6546, Engineering Report 10, "Dynamic Control Forces of the Oilgear 311 Pump"  1948 January 27 

20

Project 6546, Engineering Report 11, "Response of Network to Suppressed Carrier Inputs"  1948 February 18 

20

Project 6546, Engineering Report 12, "Relay Switching Circuit for Synchronizing a Two-Speed Synchro Data System"  1948 February 24 

20

Project 6546, Engineering Report 13, "Design of Back-Bearing Supports"  1948 February 19 

20

Project 6546, Engineering Report 14, "LC-Tuned Networks for Stabilizing A-C Servos"  1942 January 10 

20

Project 6546, Engineering Report 15, "Induction Motor Torque in Terms of Side-band Components of Control Voltage"  1948 March 9 

20

Project 6546, Engineering Report 16, "Solution of Differential Equations of a Pile"  1948 March 19 

20

Project 6546, Engineering Report 17, "Design of Crank for Manual Operation of Emergency Rods"  1948 May 12 

20

Project 6546, Engineering Report 19, "Characteristics of Weston Model Sensitrol Relay"  1948 April 26 

21

Project 6546, Engineering Report 20, "Design and Layout of Console, Control Panel, and Cabinets for Control Room and Equipment Room"  1948 April 9 

21

Project 6546, Engineering Report 21, "Design of Control Rod Racks"  1948 May 17 

21

Project 6546, Engineering Report 22, "Design of Coarse Rod-Position Indicator"  1948 May 11 

21

Project 6546, Engineering Report 23, "Design of Regulating Rod Position Transmitter"  1948 June 11 

21

Project 6546, Engineering Report 24, "Design of Emergency Rod Position Transmitter"  1948 June 11 

21

Project 6546, Engineering Report 25, "Control Rod Overtravel, Stop and Drive Pinion"  1948 May 18 

21

Project 6546, Engineering Report 26, "Flywheel Design for Emergency Rods"  1948 May 10 

21

Project 6546, Engineering Report 27, "Jigs for Splicing Control Rod Assemblies"  1948 May 3 

21

Project 6546, Engineering Report 28, "Regulating Rod Drives"  1948 July 23 

21

Project 6546, Engineering Report 30, "Design of Instrument Pinion Support"  1948 April 23 

21

Project 6546, Engineering Report 31, "Emergency Shutdown and Alarm System"  1948 May 28 

21

Project 6546, Engineering Report 32, "Design of Emergency Rod Drives"  1948 August 19 

21

Project 6546, Engineering Report 33, "Hydraulic Pump Stroke Control and Limit Stop Gearing for Emergency Rods"  1948 August 17 

21

Project 6546, Engineering Report 34, "Metal and Graphite Temperature Systems"  1948 May 28 

21

Project 6546, Engineering Report 36, "Rod-Position Recorders"  1948 May 20 

21

Project 6546, Engineering Report 37, "Emergency Rod Electric Drive Motor, Tachometer and Motor Control"  1948 June 1 

21

Project 6546, Engineering Report 38, "Part One: Reversal Time and Backlash of 1/6 h.p. Induction Motor Driving D.O. James Reducer under No Load Conditions; Part Two: Coasting Time and Power Consumption of above Combination under Load Conditions"  1948 July 19 

21

Project 6546, Engineering Report 39, "Trip Chamber Power Supply"  1948 December 14 

21

Project 6546, Engineering Report 40, "LC-Tuned Lead Networks for A-C Service"  1948 July 8 

21

Project 6546, Engineering Report 41, "Design of Emergency Rod Position Indicator System"  1948 August 11 

21

Project 6546, Engineering Report 42, "Design of Regulation-Rod Position Indicating System"  1948 August 31 

21

Project 6546, Engineering Report 43, "Building Radiation Monitors"  1949 January 12 

21

Project 6546, Engineering Report 50, "Ion Chamber Power Supply (Negative)"  1949 January 21 

21

Project 6546, Engineering Report 51, "High-Level Trip-Circuit Test Meter"  1949 January 27 

22

Project 6546, Engineering Report 53, "Range-Extending Register for Beckman Amplifier"  1949 March 29 

22

Project 6546, Engineering Report 54, "High-Level Electronic Relay"  1949 February 8 

22

Project 6546, Engineering Report 55, "Neutron-Counting and Neutron-Counting-Rate Systems"  1949 April 18 

22

Project 6546, Engineering Report 56, "Ion Chamber Power Supply (Positive)"  1949 January 26 

22

Project 6546, Engineering Report 57, "Automatic Power Regulation for the Brookhaven Reactor"  1949 February 3 

22

Project 6546, Engineering Report 58, "Alternative Plans for Instrument-System Installation"  1949 February 2 

22

Project 6546, Manual of Insturments and Controls for the Brookhaven Nuclear Reactor Volume I 1949 

22

Project 6546, Manual of Insturments and Controls for the Brookhaven Nuclear Reactor Volume II 1949 

22

Project 6546, TX-O Programming 

22

Project 6575, Engineering Report 1, "Toledo Scale Company Remote-Servo Indicator"  1948 April 23 

23

Project 6613, Engineering Report 1, "Considerations for the Design of Accumulating Tank"  1948 August 17 

23

Project 6655, Engineering Report, "Characteristics of Governing System for Aircraft Alternator Using Sundstrand Fifty-Horsepower Constant Speed Drive"  1949 November 1 

23

Project 6655, Engineering Report, "Characteristics of a Modified Governor Solenoid When Used with Sundstrand Fifty-Horsepower Constant Speed Alternator Drive"  1950 January 24 

23

Project 6663, Engineering Report 1, "Proposed Aims for Electrical Engineering Group with Regard to High-Voltage Accelerator"  1949 May 9 

23

Project 6663, Engineering Report, "Operating Instructions for Nuclear Magnetic-Resonance Control of Magnet on Rockefeller Van De Graaff Generator"  1951 September 17 

23

Project 6663, Engineering Memorandum 2, "Trip to University of California and Stanford University, San Francisco, California (March 25 to April 5, 1949)"  1949 July 30 

23

Project 6663, Engineering Memorandum 3, "Work Accomplished in July and August of 1949"  1949 September 28 

23

Project 6663, Engineering Memorandum 4, "Spherical Ionization Chamber and Area Monitor"  1949 September 28 

23

Project 6663, Engineering Memorandum 5, "Experiments with Radiation Counter Laboratories Nucleometer"  1949 September 28 

23

Project 6663, Engineering Memorandum 6, "The Detection of Nuclear Resonance and its Development for Use in the Precision and Control of Magnetic Fields"  1949 October 18 

23

Project 6663, Engineering Memorandum 7, "Trip to Oak Ridge National laboratory from October 12, 1949 through October 14, 1949"  1949 November 28 

23

Project 6663, Engineering Memorandum 8, "Direct-Coupled Amplifier"  1949 December 19 

23

Project 6663, Engineering Memorandum 9, "Spherical Ionization Chamber Project"  1950 February 8 

23

Project 6663, Engineering Memorandum 10, "Positive High-Voltage Supply"  1950 February 3 

23

Project 6663, Engineering Memorandum 11, "Model 100 Sliding-Pulse Generator (Shielding Group No. 64)"  1950 February 27 

23

Project 6663, Engineering Memorandum 12, "A Scintillation Counter for Fast Neutrons"  1950 March 3 

23

Project 6663, Engineering Memorandum 13, "Nuclear Magnetic Resonance Analysis I"  1950 March 13 

24

Project 6663, Engineering Memorandum 14, "Report on Trip to American Physical Society Conference, Saturday, February 4, 1950"  1950 March 7 

24

Project 6663, Engineering Memorandum 15, "Modifications of Atomic Instrument Company Model 204C Linear Amplifier, Serial No. 313"  1950 March 23 

24

Project 6663, Engineering Memorandum 16, "Nuclear Magnetic Resonance Analysis II"  1950 March 20 

24

Project 6663, Engineering Memorandum 17, "A Methane-Filled counter for Fast Neutrons"  1950 March 24 

24

Project 6663, Engineering Memorandum 18, "Trip Report on IRE Conference, New York, March 6-9, 1950"  1950 April 10 

24

Project 6663, Engineering Memorandum 19, "Stabilizing Circuit for Amplifiers"  1950 April 14 

24

Project 6663, Engineering Memorandum 20, "Alignment Procedure for the Model 310 Pulse Analyzer"  1950 May 24 

24

Project 6663, Engineering Memorandum 21, "A Study of Pulse-Amplitude Analysis in Nuclear Research"  1950 July 24 

24

Project 6663, Engineering Memorandum 22, "Logarithmic Characteristic of Type 9004 Diode"  1950 July 20 

24

Project 6663, Engineering Memorandum 23, "The ‘White’ Cathode Follower"  1950 November 22 

24

Project 6663, Engineering Memorandum 24, "G-M Tube Quench Unit"  1951 February 20 

24

Project 6663, Engineering Memorandum 26, "Report of D-C Amplifier Symposium and Exhibits at IRE National Convention, New York, March 19-22, 1951"  1951 May 4 

24

Project 6663, Engineering Memorandum 27, "G-M Tube Quench Unit, Model 2"  1951 May 25 

24

Project 6663, Engineering Memorandum 28, "Report on Visit to Oak Ridge, October 15, 16 and 17, 1951"  1951 November 28 

24

Project 6663, Engineering Memorandum 29, "The Construction and performance of the Recently Built High-Pressure Propane and Hydrogen Proton-Recoil Counters"  1952 March 18 

25

Project 6663, Engineering Memorandum 30, "The Electrostatic Theory of Cylindrical Ion Cambers"  1952 April 2 

25

Project 6663, Technical Report 1-6663, "Precision Magnetic Field Regulation Using Nuclear Magnetic Resonance"  1950 December 4 

25

Project 6666, Engineering Report 1, "Study of Stable Base for SPS-2 Antenna"  1949 April 30 

25

Project 6673, "Air Traffic Control Bibliography of Engineering Notes and Memos"  1951 

25

Project 6673, Engineering Note E-2012, "Characteristics of Private-Line Communications"  1950 March 24 

25

Project 6673, Engineering Note 2018, "Subroutines Useful in Coordinate Conversion"  1951 January 10 

25

Project 6673, Engineering Note 2020, "Sampled-Data Control Systems Studied Through Comparison of Sampling with Amplitude Modulation"  1951 May 2 

25

Project 6673, Memorandum M-2047, "Proposal for Connection WWI to a Pulsed Radar"  1950 May 9 

25

Project 6673, Report R-188, "Air Traffic Control"  1950 June 8 

25

Project 6674, Engineering Report 47, "Fission Chamber"  1949 July 1 

25

Project 6683, Progress Reports 1-11 and Engineering Memorandums 1-7 1949 July to 1950 June 

25

Project 6694, Computation Book, R. J. Cypser 1949 September 12 

26

Project 6694, Computation Book, D. Dick 1950 September 

26

Project 6694, Computation Book, William L. Poland 1950 August 25 

26

Project 6694, Computation Book, E.S. Prohaska 1949 November 15 

26

Project 6694, Computation Book, Eugene B. Skolnikoff 1950 February 6 to June 1 

26

Project 6694, Computation Book, A. K. Susskind 1951 May 29 

26

Project 6694, Computation Book, J. O. McDonough 1949 August 18 

27

Project 6694, Compuation Book, J. O. McDonough 1950 March 7 

27

Project 6694, Crystal History Sheets 

27

Project 6694, contractual matters and correspondence, Parsons Machine Tool Co. 1949-1950 

27

Project 6694, Engineering Memos #1-#20 (2 folders) 1949-1950 

27

Project 6694, Engineering Report 1, "Physics of Metal Cutting and a Calculation of the Outting Forces to be Expected on the Parsons Milling Machine"  1949 October 18 

27

Project 6694, Engineering Report 2, "Provisional Specifications for the Development of a Numerically Controlled Milling Machine"  1950 June 30 

27

Project 6694, general 1950 

27

Project 6694, memos 1949-1951 

27

Project 6694, notes 1950-1951 

27

Project 6694, proposal notes 1949 September 16 

27

Project 6694, Technical Progress Reports, Marsh 1949-1950 

28

Project 6694, A: drawings 1949-1955 

28

Project 6694, B: drawings 

81

Project 6694, C, D: drawings 

82

Project 6694, E: drawings 

83

Project 6704, Report, "Description and Operating Instructions Control System for Air Valves of Two-Dimensional Transonic Blowdown Tunnel"  1950 June 

29

Project 6704, Engineering Report 1, "Design Considerations and Test Data of Air-Valve Positioning System for NACA Langley Aeronautical Laboratory Two-Dimensional Blowdown Tunnel"  1951 January 31 

29

Project 6709, Engineering Report, "Instrument Servomechanisms for Data Transmission by Radio Link"  1950 January 19 

29

Project 6732, Engineering Memorandum 1, "Design of Linear Flow Valves"  1950 November 14 

29

Project 6732, Engineering Memorandum 2, "Maximum Sinusoidal Output as Criteria for the Design of Flow Valves"  1951 May 28 

29

Project 6732, Engineering Memorandum 3, "A High Performance Band-Pass Filter for A-C Servomechanism"  1951 August 13 

29

Project 6732, Engineering Report, "Final Report on Control Valve System"  1951 June 26 

29

Project 6770, Engineering Memorandum 1, "Temperature-Control Requirements for Cloud Chamber"  1950 December 26 

29

Project 6770, Engineering Memorandum 2, "Properties of the Mixture of Air and Water Vapor in the Cloud Chamber"  1951 January 3 

29

Project 6770, Engineering Memorandum 3, "Heat Transfer between a Fine Wire and Quiet Air"  1951 March 1 

29

Project 6770, Engineering Memorandum 4, "Sensing Element for Air Temperature"  1951 February 26 

29

Project 6770, Engineering Memorandum 5, "Expansion Control System for Cloud Chamber"  1951 April 6 

29

Project 6770, Engineering Memorandum 6, "Design Considerations for Nozzle-Control Equipment"  1951 April 26 

30

Project 6770, Engineering Memorandum 7, "Needle Profile for Exhaust Nozzle"  1951 April 30 

30

Project 6770, Engineering Memorandum 8, "Resistance Thermometer Bridge"  1951 October 17 

30

Project 6770, Engineering Memorandum 9, "Derivation of Transfer Function of Expansion Process"  1951 October 18 

30

Project 6770, Engineering Report 1, "Study of Cloud-Chamber Specifications"  1950 December 6 

30

Project 6770, Engineering Report 2, "Project Progress between December 1950 and September 1951"  1951 October 19 

30

Project 6770, Report, "Description and Operating Instructions for Slow Expansion Cloud Chamber"  1952 October 

30

Project 6846, Engineering Report 1, "Survey of Commercial Equipment"  1951 April 12 

30

Project 6846, Engineering Report 2, "Discussion of Proposed System for the Valve Positioner"  1951 April 17 

30

Project 6846, Engineering Report 3, "Study of Electric Servo-Mechanisms for Valve-Positioner Application"  1951 June 8 

30

Project 6846, Engineering Report 4, "Description and Operating Instructions of Valve Positioning System"  1951 October 2 

30

Project 6846, Memorandum, "General Characteristics of a du Pont Valve Positioner"  1951 August 13 

30

Project 6873, Allied Developments 1953 

31

Project 6873, Allied Developments 1953-1955 

31

Project 6873, Allied Developments, clippings 1955-1956 

31

Project 6873, "Approaches to Design Problems in Conversion Equipment," A. K. Susskind 1954 February 12 

31

Project 6873, ADSID 1958 

31

Project 6873, AIA, Members-NCSC 

31

Project 6873, AIA, miscellaneous 1958 

31

Project 6873, AIA, notices of meetings, etc. 1957-1959 

32

Project 6873, AIA, Test Piece No. 2 undated 

32

Project 6873, "Automatic Data Processing for Numerical Control," H. J. Langlie (ALWAC) 1958 July 10 

32

Project 6873, application to Numerically Controlled Machine Tools undated 

32

Project 6873, Automatically Programmed Tool Language Change Memo 1958-1959 

32

Project 6873, Automatically Programmed Tool Language Diagnostic Print Routine-AIA, W. K. McKinley 1958 January 14 

32

Project 6873, Automatically Programmed Tool Language drawings undated 

32

Project 6873, Automatically Programmed Tool Language Instructions-AIA undated 

32

Project 6873, Automatically Programmed Tool Language Dictionary, Volume II, Appendix A 

32

Project 6873, Automatically Programmed Tool Language Dictionary, Volume II, Appendix A 1961 April 3 

32

Project 6873, Automatically Programmed Tool Language paper 1958 July 30 

32

Project 6873, Automatically Programmed Tool Language Programmer’s Coordination 1959 May 1 

33

Project 6873, Automatically Programmed Tool Language, "General Description of the APT System," Volume I, Douglas T. Ross 

33

Project 6873, Automatically Programmed Tool Language, "APT Part Programmer’s Manual," Volume II, Douglas T. Ross 

33

Project 6873, Automatically Programmed Tool Language, "APT Part Programmer’s Manual, Revision I: The Automatically Programmed Tool System," Volume II 

33

Project 6873, Automatically Programmed Tool Language, "Description of APT Computer Programs," Volume IV 

34

Project 6873, Automatically Programmed Tool Language, "Operator’s and Troubleshooter’s Manual," Volume 5, Clarence G. Feldmann 

34

Project 6873, Automatically Programmed Tool Language, "Modification and Change Procedures," Volume VI, Clarence G. Feldmann 

34

Project 6873, Automatically Programmed Tool Language, "Group Control for Automatic Manipulation of Computer Programs Which Exceed Core Memory," Volume VII, David F. McAvinn 1960 February 8 

34

Project 6873, Automatically Programmed Tool Language reports 1958 

34

Project 6873, Automatically Programmed Tool Language, Special APT Bulletin, David F. McAvinn 1959 

34

Project 6873, Automatically Programmed Tool Language II, AIA-2D APT II System 1957-1958 

34

Project 6873, Automatically Programmed Tool Language II Coordinators Reports 1-8 1958-1959 

35

Project 6873, Automatically Programmed Tool Language II memos and technical documents 1958 

35

Project 6873, Automatically Programmed Tool Language II Program Operator Notes 1958 April 10 

35

Project 6873, Automatically Programmed Tool Language II, 2D Translation Phase 1958 May 16 

35

Project 6873, Automatically Programmed Tool Language II, 2D APT II Change Notices 1957-1959 

35

Project 6873, Automatically Programmed Tool Language II, 2D APT II Phase I Programmer’s List 1957-1958 

35

Project 6873, Automatically Programmed Tool Language II, 2D APT Test Case Print Out undated 

35

Project 6873, Artificial Intelligence undated 

36

Project 6873, Association for Computing Machinery Speech, J. H. Runyon 1958 October 20 

36

Project 6873, Auto Prompt 1958 July 23 

36

Project 6873, "Barnesdril: Program Type Machine"  undated 

36

Project 6873, Beeby, William D., "The Operating Experience on Aircraft Production"  1958 December 1 to December 5 

36

Project 6873, "Bibliography on Numerical Control of Machine Tools," A.K. Susskind 1958, 1966 

36

Project 6873, Boeing Library Routines 1956, 1957 

36

Project 6873, brochure 1951-1952 

36

Project 6873, CAD notes for book 1960 

36

Project 6873, Conservation Seminar Talk, Columbia University 1953 

36

Project 6873, correspondance 1955-1957 

36

Project 6873, Correspondance AIA 1959 

36

Project 6873, Computation Center Bulletins and memos 1957-1958 

36

Project 6873, Computation Center F. M. Verzuh file 1959 

36

Project 6873, Concord Control 1956 December 26 

36

Project 6873, course outline and workbook for special course on Programmig for Numerically Controlled Machine Tools 1957 

36

Project 6873, Demonstration of Numerically Controlled Milling Machine 1952 September 

37

Project 6873, Demonstration Letters of Request 1952 

37

Project 6873, Designers for Industry 1959 

37

Project 6873, DSR Contract Proposal for Coming Year 1959 

37

Project 6873, distribution lists 1958-1960 

37

Project 6873, distribution lists 1949-1964 

37

Project 6873, DSR: meetings 1957-1958 

38

Project 6873, DSR (hectos): Status Letters Nos. 77-100 1958 

38

Project 6873, DSR (hectos): Status Letters Nos. 101-117 1958 August to 1959 December 

38

Project 6873, Economic Evaluation Studies 1954 

38

Project 6873, Economic Study: Gregory and Atwater 1952, 1954 

38

Project 6873, Electronic Associates 1958 

38

Project 6873, ERA 1103 1955 

38

Project 6873, Distribution of Final Report, Part 2, MCPBIS Requests 1953 

38

Project 6873, foreign visitors 1956-1958 

38

Project 6873, 7108, Giddings and Lewis Project 1953-1987 

38

Project 6873, general invitation memorandum, AED Project undated 

38

Project 6873, general memoradums 1949-1952 

38

Project 6873, general memorandums 1957-1958 

39

Project 6873, Group Control Program: Semi Monthly Reports 1958-1959 

39

Project 6873, IBM circa 1950s 

39

Project 6873, ILO Symposium on Computer-Aided Design 1963 May 9 

39

Project 6873, INSPRE Write-up, Attachment A undated 

39

Project 6873, "Investigation of a Servo-Type Pulse-to-Analog Data Converter," Engineering Report No. 5, W. L. Poland 1951 

39

Project 6873, Jackson and Moreland Inc. 1958 March 

39

Project 6873, Job Analyses Nos. 1-13 

39

Project 6873, Job Analyses Nos. 14-74 

39

Project 6873, Liaison correspondence 1953-1954 

39

Project 6873, Liaison correspondence 1955 

40

Project 6873, Liaison correspondence 1956 

40

Project 6873, Liaison talks 1952-1954 

40

Project 6873, Long Range Computer Study Committee (DTR) 1961 April 

40

Project 6873, "Machining Characteristics of High Strength Thermal Resisant Materials Phase I: Survey of Existing Information Isolation of Problems," Wright Aeronautical Serial Report No. MP.00-159 1958 February 28 

40

Project 6873, Machine Tool Systems Suppliers undated 

40

Project 6873, memorandum 1951-1956 

40

Project 6873, Milling Machine Project, visitors 1951-1954 

41

Project 6873, Milling Machine Project, Summer Course 1955 

41

Project 6873, Milling Machine Project, texts 1954-1955 

41

Project 6873, miscellaneous 1951-1952 

41

Project 6873, MIT News Service 1954 

41

Project 6873, MIT Programmer’s meeting 1959 April 27 to May 1 

41

Project 6873, MIT Programmer’s Reports 1957-1959 

41

Project 6873, "Numerical Control of Machine Tools," SSP notes 1955 

42

Project 6873, "Numerical Control of Machine Tools," Summer Session 1954 

42

Project 6873, Numerical Control: General Electric 1957 September 

43

Project 6873, Numerical Control: History 1951, 1970 

43

Project 6873, Numerical Control: Indoctrination 1951-1952 

43

Project 6873, Numercial Control: Instruction Manual 1958 April 3 

43

Project 6873, Numerical Control: Lockheed 1957 May 3 

43

Project 6873, Numerical Control: miscellaneous correspondence 1957-1970 

43

Project 6873, Numerical Control: MIT 

43

Project 6873, Numerical Control: training programs 1957 

43

Project 6873, Numerical Control: other numerical controls 1951-1952 

43

Project 6873, Numerical Control: "A Numerically Controlled Milling Machine," J. O. McDonough undated 

44

Project 6873, Numerical Control: "A Numerically Controlled Milling Machine," J. O. McDonough, A. J. Susskind undated 

44

Project 6873, Numerical Control: "A Numerically Controlled Milling Machine: Final Report to the U.S. Air Force on Contruction and Initial Operation," Part II 1953 May 31 

44

Project 6873, 6694, Parsons Corporation 1950-1953 

44

Project 6694, Parsons Corporation: Progress Reports 1950-1951 

44

Project 6873, 6694(?), Parsons Corporation presentation 1950 

44

Project 6873, 6694(?), patents 1949-1955 

44

Project 6873, Patents (US), Machine Tools (1-2 of 3 folders) 

45

Project 6873, Patents (US), Machine Tools (3 of 3 folders) 

46

Project 6873, Pratt and Whitney undated 

46

Project 6873, press clippings 1951-1955 

46

Project 6873, Production Engineering Show 1955 

47

Project 6873, Production Engineering Show in Chicago, photographs 1955 September 6 to September 16 

47

Project 6873, Problem 184: "Automatic Programming for Numerically Controlled Machine Tools"  1958 June 13 

47

Project 6873, project data 1957-1959 

47

Project 6873, project visitors 1956-1958 

47

Project 6873, requests for information 1952 

47

Project 6873, requests for information 1953 

47

Project 6873, requests for information 1954 

48

Project 6873, requests for information 1955 

48

Project 6873, requests for information 1956 

48

Project 6873, requests: foreign 1952-1956 

48

Project 6873, Ross: ASME paper 1959 December 

48

Project 6873, "A Static-Magnetic Data Storage Unit," Richard Fuller 1955 

48

Project 6873, status letters 1956-1959 

48

Project 6873, 6694, Summary and Project Statements 1950-1959 

48

Project 6873, talks 1955 

48

Project 6873, talks by others 1952-1953 

48

Project 6873, Task 1 1957-1958 

49

Project 6873, Task 2 1957 

49

Project 6873, Task 3 1957-1958 

49

Project 6873, Task 4 1957-1958 

49

Project 6873, Task 5 1957-1958 

49

Project 6873, Task 6 1956-1957 

50

Project 6873, Task 7 1957-1958 

50

Project 6873, Task 8 1957-1958 

50

Project 6873, Task 9 1957-1958 

50

Project 6873, Task 10 1956-1958 

50

Project 6873, Technical: N/C Technical-Early Outsiders 1949-1951 

51

Project 6873, telegrams 1959 April 

51

Project 6873, thank you notes from grateful visitors 1955 

51

Project 6873, trip data 1956-1959 

51

Project 6873, trip reports 1951-1955 

51

Project 6873, Wayne University talk, J. F. Reintjes 1955 

51

Project 6873, William M. Webster, ASME paper 1959 December 

51

Project 6873, Western Computer Conference 1954 April 

51

Project 6873, Whirlwind results 1957 

51

Project 6873, workbook 1957 

51

Project 6873, 6694, computation book, J. H. Brown 1949 September to 1952 January 

52

Project 6873, computation book, J. H. Brown 1952 January to 1955 July 

52

Project 6873, computation book, D. F. Clements 1957 

52

Project 6873, computation book, Dick Fuller 1952 September to 1954 May 

52

Project 6873, computation book, H. P. Grossimon 1952 August 7 

52

Project 6873, computation book, H. P. Grossimon 1952 February 6 

52

Project 6873, 6506, computation book, Dorothy A. Hamilton 1950 November 15 

53

Project 6873, computation book, F. T. Hulswit 1951 June 25 

53

Project 6873, 6694, computation book, J. O. McDonough 1951 June 12 

53

Project 6873, 6694, computation book, Robert F. Merkle 1952 February 4 

53

Project 6873, computation book, Peter R. Pettler undated 

53

Project 6873, 6677, computation book, William L. Poland 1951 March 15 

53

Project 6873, correspondence 1950 

54

Project 6873, correspondence 1950-1953 

54

Project 6873, correspondence 1951 

54

Project 6873, correspondence, A-L 1952 

54

Project 6873, correspondence, M-Z 1952 

54

Project 6873, correspondence, A-L 1953 

54

Project 6873, correspondence, M-Z 1953 

54

Project 6873, correspondence, A-C 1954 

55

Project 6873, correspondence, D-J 1954 

55

Project 6873, correspondence, K-Q 1954 

55

Project 6873, correspondence, R-Z 1954 

55

Project 6873, correspondence: Air Materiel Command 1954-1956 

56

Project 6873, correspondence 1955 

56

Project 6873, correspondence 1956-1957 

56

Project 6873, correspondence: Air Materiel Command 1956-1959 

56

Project 6873, correspondence 1956-1959 

56

Project 6873, correspondence 1958 

57

Project 6873, correspondence 1959 

57

Project 6873, correspondence by Clarence G. Feldmann 1959 

57

Project 6873, correspondence by David F. McAvinn 1959 

57

Project 6873, correspondence by Robert B. Polansky 1959 

57

Project 6873, correspondence and contracts 1951-1956 

57

Project 6873, correspondence and contracts 1956-1962 

57

Project 6873, correspondence and contracts 1958-1961 

58

Project 6873, 6677, 7039, contracts (mostly regarding patent matters) 1952-1967 

58

Project 6873, N/C contracts 1950-1951 

58

Project 6873, drawings undated 

58

Project 6873, A, B, C, and E drawings 

84

Project 6873, Engineering Memorandum No. 21, "Electronic Test Equipment," J. H. Brown 1951 August 24 

58

Project 6873, Engineering Memorandum No. 22, "Lubricating Properties of Several Lubricants on Cast Iron Surfaces," E. J. Samario 1952 July 10 

58

Project 6873, Engineering Memorandum No. 23, "Provisional Speicifications and Estimated Time Study Analysis for the Development of a Numerically Controlled Boring Mill," R. F. Merkle 1952 July 10 

58

Project 6873, Engineering Memorandum No. 24, "Investigation of Low-Frequency Wander in Power Servo of MIT Numerically Controlled Milling Machine," Vinton B. Haas 1952 

58

Project 6873, Engineering Memorandum No. 25, "Oscillations in the Cross-Slide Power Servomechanism," Vinton B. Haas, Jr. 1953 August 3 

58

Project 6873, Engineering Memorandum No. 26, "Inspection Results on the Cross-Slide Instrument Cylindrical Rack," David Armstrong 1953 November 3 

58

Project 6873, Engineering Memorandum No. 27, "Programming for a Supersonic Nozzle," J. H. Runyon 1953 November 24 

58

Project 6873, Engineering Memorandum No. 28, "Tape Preparation for Airfoil Templates," J. H. Runyon 1953 December 3 

58

Project 6873, Engineering Memorandum No. 29, "Fitting with Conic Surfaces," S. M. Sussman 1954 January 28 

59

Project 6873, Engineering Memorandum No. 30, "Matrix Notation for Quadric Surfaces," S. M. Sussman 1954 May 1 

59

Project 6873, Engineering Memorandum No. 31, "Proposed Method for Interpolation," S. M. Sussman 1954 June 11 

59

Project 6873, Engineering Memorandum No. 33, "Cross-Slide Instrumentation," David E. Armstrong 1954 June 22 

59

Project 6873, Engineering Report No. 3, "Automatic Measurement of Lineal Motion Using Optical Gratings," J. H. Brown 1951 June 12 

59

Project 6873, Engineering Report No. 4, "Direct-Current Damping of a Two-Phase Servomotor," M. J. Fitzmorris 1952 January 31 

59

Project 6873, Engineering Report No. 5, "Investigation of a Servo-Type Pulse-to-Analog Data Converter," W. L. Poland 1951 November 27 

59

Project 6873, Engineering Report No. 6, "Tests on the Position of a Numerically Controlled Milling Machine," J. H. Brown 1953 April 21 

59

Project 6873, Engineering Report No. 7, "Investigations of Methods of Data Preparation for a Numerically Controlled Planer," John H. Runyon 1953 June 1 

59

Project 6873, Engineering Report No. 8, "Whirlwind I Routines for Computations for the MIT Numerically Controlled Milling Machine," John H. Runyon 1953 December 1 

59

Project 6873, Engineering Report No. 9, "A Static-Magnetic Data-Storage Unit," Richard H. Fuller 1954 May 1 

59

Project 6873, Engineering Report No. 10, "Stabilization of a Control System Having Coulomb Friction," John Steranka, Jr. 1954 August 1 

60

Project 6873, Engineering Report No. 11, "Theoretical Evaluation of the Accuracy of a Shaft-to-Phase -Modulated-Voltage Converter," J. Herber Brown 1954 September 1 

60

Project 6873, Engineering Report No. 12, "A Single Line Magnetic Shift Register Using Diode Amplifiers," Chris A. Lay, Jr. 1955 May 23 

60

Project 6873, Engineering Report No. 13, "A System Study for a Digital-to-Analog Servomechanism," T. W. Tucker 1955 December 27 

60

Project 6873, Engineering Report No. 14, "Numerical Control for Machining and Warped Surfaces," George Bromfield 1956 January 12 

60

Project 6873, Engineering Report No. 15, John H. Runyon undated 

60

Project 6873, Engineering Report No. 16, "Information-Processing Routine for Numerical Control," Arnold Siegal 1956 March 1 

60

Project 6873, Engineering Report No. 17, "Operations of a Numerically Controlled Milling Machine," Donald C. Dick 1956 March 15 

60

Project 6873, Engineering Report No. 18, "Economic Studies of Work Performed on a Numerically Controlled Milling Machine," Robert H. Gregory and Thomas V. Atwater, Jr. 1956 March 1 

60

Project 6873, Final Report, Parts 1 and 2 1952 July 30 and 1953 May 31 

60

Project 6873, Final Report Part 2, correspondence 1953-1954 

60

Project 6873, Final Report, Design, "Development and Evaluation of a Numerically Controlled Milling Machine"  1956 March 15 

61

Project 6873, Final Report, "Automatic Programming of Numerically Controlled Machine Tools," John E. Ward 1960 January 15 

61

Project 6873, Final Report 

85

Project 6873, Outline of Interim Reports 4-7 1958 August 22 

61

Project 6873, Interim Engineering Reports IR-1 and IR-2, 26 June 1956 to 31 December 1956 1956 June 26 to December 31 

61

Project 6873, Interim Engineering Report IR-3 1957 January 1 to March 31 

61

Project 6873, Interim Engineering Reports IR-4 and IR-5, Samuel M. Matsa 1957 April 1 to December 31 

61

Project 6873, Interim Engineering Reports IR-6 and IR-7, project staff 1958 January 1 to June 30 

61

Project 6873, Interim Engineering Reports IR-8 and IR-9, project staff 1958 July 1 to 1959 February 28 

61

Project 6873, Interim Engineering Report IR-10 and IR-11, project staff 1959 March 1 to November 30 

61

Project 6873, Memorandums, Book 1 1953-1954 

61

Project 6873, Memorandums, Book 2 1954-1956 

61

Project 6873, memorandums, general 1953-1959 

62

Project 6873, memorandum 1953 October 20 

62

Project 6873, miscellaneous memos 1958 

62

Project 6873, 2D Automatically Programmed Tool Language II memos 1957-1958 

62

Project 6873, Memorandum, 2D Automatically Programmed Tool Language II 1 1957 June 14 

62

Project 6873, Memorandum, 2D Automatically Programmed Tool Language II 2 1957 June 14 

62

Project 6873, Memorandum, 2D Automatically Programmed Tool Language II 3 1957 June 14 

62

Project 6873, Memorandum, 2D Automatically Programmed Tool Language II 4 undated 

62

Project 6873, Memorandum, 2D Automatically Programmed Tool Language II 5 undated 

62

Project 6873, Memorandum, 2D Automatically Programmed Tool Language II 6 1957 June 21 

62

Project 6873, Memorandum, 2D Automatically Programmed Tool Language II 7 1957 June 28 

62

Project 6873, Memorandum, 2D Automatically Programmed Tool Language II 8 1957 August 1 

62

Project 6873, Memorandum, 2D Automatically Programmed Tool Language II 9 1957 August 30 

62

Project 6873, Memorandum, 2D Automatically Programmed Tool Language II 10 1957 September 27 

62

Project 6873, Memorandum, 2D Automatically Programmed Tool Language II 11 1957 October 27 

62

Project 6873, Memorandum, 2D Automatically Programmed Tool Language II 12 1958 February 4 

62

Project 6873, Memorandum, 2D Automatically Programmed Tool Language II 13 1958 March 12 

62

Project 6873, Memorandum, 2D Automatically Programmed Tool Language II 14 1958 April 4 

62

Project 6873, Memorandum, 2D Automatically Programmed Tool Language II 15 1958 April 15 

63

Project 6873, Memorandum, 2D Automatically Programmed Tool Language II 16 1958 April 29 

63

Project 6873, Memorandum, 2D Automatically Programmed Tool Language II 17 1958 May 1 

63

Project 6873, Memorandum, 2D Automatically Programmed Tool Language II 18 1958 June 16 

63

Project 6873, Memorandum, 2D Automatically Programmed Tool Language II 19 1958 July 25 

63

Project 6873, Memorandum, 2D Automatically Programmed Tool Language II 20 1959 March 31 

63

Project 6873, Progress Reports (3 folders) 1949-1958 

63

Project 6873, publications 1952-1986 

64

Project 6873, publications 1954-1955 

64

Project 6873, Technical Memorandum 1 1957 May 31 

64

Project 6873, Technical Memorandum 2 1957 May 1 

64

Project 6873, Technical Memorandum 3 1958 January 7 

64

Project 6873, Technical Memorandum 4 1958 July 1 

64

Project 6873, Technical Memorandum 5 1958 August 14 

64

Project 6873, Technical Memorandum 6 1958 August 28 

64

Project 6873, Technical Memorandum 7 1958 September 22 

64

Project 6873, Technical Memorandum 8 1959 February 16 

64

Project 6873, Technical Memorandum 9, "A Digital Computer Analysis Method for Simpe English Sentences," Clarence G. Feldmann 1959 July 

64

Project 6873, Technical Memorandum 10 1959 September 

64

Project 6873, Technical Memorandum 11, "Adaptive Control of Curve-Following Devices," Carl E. Nielsen 1958 

64

Project 6873, Technical Memorandum 12 1959 September 

64

Project 6873, Technical Progress Letters, numbers 109, 111-117 1959 

64

Project 6879, Memorandum 27 1953 September 15 

65

Project 6889, Engineering Note E-426 1951 September 14 

65

Project 6897, Engineering Report 2 1952 February 29 

65

Project 6897, Engineering Report 3 1952 October 31 

65

Project 6897, Engineering Report 4 1953 June 9 

65

Project 6897, Engineering Report 5 1953 October 30 

65

Project 6897, Engineering Report 7 1954 July 1 

65

Project 6897, Engineering Report 8 1955 April 4 

65

Project 6897, Technical Memorandum 1 1952 May 20 

65

Project 6897, Technical Memorandum 2 1952 June 2 

65

Project 6897, Technical Memorandum 3 1952 June 10 

65

Project 6897, Technical Memorandum 5 1952 September 19 

65

Project 6897, Technical Memorandum 6 1952 November 17 

65

Project 6897, Technical Memorandum 10 1953 June 4 

65

Project 6897, Technical Memorandum 11 1953 June 22 

66

Project 6897, Technical Memorandum 14 1954 May 24 

66

Project 6897, Technical Memorandum 15 1954 July 1 

66

Project 6897, Technical Memorandum 16 1954 July 28 

66

Project 6897, Technical Memorandum 20 1955 May 23 

66

Project 6897, Technical Memorandum 21 1955 July 1 

66

Project 6908, Technical Memorandum 1 and 2 1952 

66

Project 6908, Engineering Report 1 1952 March 3 

66

Project 6908, Engineering Report 2 1952 September 26 

66

Project 6908, memorandum 1951 October 26 

66

Project 6908, numbered memorandums 1951-1952 

66

Project 6908, memorandum 1952 March 18 

66

Project 6908, Progress Report No. 1 1951 July 1 to 1952 April 30 

66

Project 6908, Progress Report No. 2 1952 May 1 to October 31 

66

Project 6916, Engineering Memorandum 1 1951 July 30 

66

Project 6916, Engineering Memorandum 2 1951 August 7 

67

Project 6916, Engineering Memorandum 3 1951 

67

Project 6916, Engineering Report 1 1951 December 13 

67

Project 6916, Engineering Report 2 1952 March 20 

67

Project 6916, Engineering Report 3 1952 March 27 

67

Project 6986, report undated 

67

Project 7002, correspondence, Lincoln 1954-1957 

67

Project 7002, Engineering Memorandums 1-13 1953-1954 

67

Project 7002, Engineering Report 1 1952 December 10 

67

Project 7002, Engineering Report 2 1953 February 9 

67

Project 7002, Engineering Report 3 1953 April 27 

67

Project 7002, Engineering Report 4 1953 April 27 

67

Project 7002, memorandums and reports binder 1953-1957 

67

Project 7002, outside requests for reports 1956-1957 

68

Project 7002, current 1957 

68

Project 7002, SLR 1957 January 

68

Project 7002, Technical Memorandums 14-28 1954-1955 

68

Project 7002, Technical Memorandums 29-37 1955-1956 

68

Project 7002, Technical Report 1, (7003-1) 1954 March 31 

69

Project 7002, Technical Report 7 1954 August 27 

69

Project 7002, Technical Report 9 1954 August 31 

69

Project 7002, Technical Report 10 1955 May 

69

Project 7002, Technical Report 11 1955 May 23 

69

Project 7002, Technical Report 12 1956 May 

69

Project 7002, Technical Report 13 1956 June 

69

Project 7002, Technical Report 14 1956 June 

69

Project 7002, Technical Report 15 1956 June 15 

69

Project 7002, Technical Report 16 1956 June 

69

Project 7002, Technical Report 17 1957 January 

69

Project 7039, disclosures of patent information, Parsons Company 1949-1957 

69

Project 7108, correspondence 1952-1953 

70

Project 7108, Progress Report 1 1953 June 1 

70

Project 7108, Final Report 1954 August 1 

70

Project 7138, DFTI Vellums 1957 

70

Project 7138, Report 1 1953 November 24 

70

Project 7138, Report 2 1953 November 16 

70

Project 7138, Report 3 1954 January 20 

70

Project 7138, Report 4 1954 May 28 

70

Project 7138, Report 5 1954 June 25 

70

Project 7138, Report 6 1954 July 27 

70

Project 7138, Report 7 1954 August 17 

70

Project 7138, Report 8 1954 October 28 

70

Project 7138, Report 9 1955 February 21 

70

Project 7138, Report 10 1955 August 1 

70

Project 7138, Report 11 1955 September 

70

Project 7138, Report 12 1955 August 8 

70

Project 7138, Report 13 1956 April 15 

71

Project 7138, Report 14 1956 June 29 

71

Project 7138, Report 15 1956 October 15 

71

Project 7138, Report 17 1957 October 

71

Project 7138, Report 19 1957 January 15 

71

Project 7138, Technical Memorandum 1 1955 January 31 

71

Project 7138, Technical Memorandum 2 1955 June 3 

71

Project 7138, Technical Memorandum 3 1955 July 14 

71

Project 7138, Technical Memorandum 4 1955 July 1 

71

Project 7138, Technical Memorandum 5 1955 September 9 

71

Project 7138, Technical Memorandum 6 1955 August 3 

71

Project 7138, Technical Memorandum 7 1956 February 7 

71

Project 7138, Technical Memorandum 8 1956 February 15 

71

Project 7138, Technical Memorandum 9 1956 September 15 

71

Project 7138, Technical Memorandum 10 1956 December 

71

Project 7138, Memorandum 21 1954 February 10 

71

Project 7138, Memorandum 24 1954 March 2 

71

Project 7138, Memorandum 98 1955 April 25 

71

Project 7138, Memorandum 107 1955 June 8 

71

Project 7138, memorandums 1955 December 21 to 1957 January 10 

71

Project 7138, Memorandum 171 1956 July 5 

71

Project 7163, correspondence 1954-1955 

72

Project 7163, Engineering Memorandum 2 1954 June 22 

72

Project 7163, general 1953-1954 

72

Project 7163, memorandums 1953-1955 

72

Project 7163, Monthly Project Reports 1956 

72

Project 7163, photographs 1953-1969 

72

Project 7166, Interim Engineering Report 3 1954 April 20 

72

Project 7166, Technical Report 54-298 Part I 1954 August 

72

Project 7166, Technical Report 54-298 Part II 1954 August 

72

Project 7342, report 1955 June 30 

73

Project 7372, Memorandum 5 1956 February 29 

73

Project 7405, report undated 

73

Project 7405, report 1956 December 

73

Project 7417, Technical Notes 57-162 1957 June 

73

Project 7420-R-4, 7967-R-2 1959 June 

73

Project 7424, Engineering Report 1 1958 March 31 

73

Project 7424, Engineering Report 2 1958 March 31 

73

Project 7424, Engineering Report 3 1958 March 31 

74

Project 7424, Technical Memorandum 1 1958 March 31 

74

Project 7424, Technical Memorandum 2 1958 March 31 

74

Project 7572, report 1956 November 20 

74

Project 7591, Final Demonstration Report 45-1 1959 April 

74

Project 7591, Memorandum 8 1958 February 28 

74

Project 7591, Report 1, Connelly 1958 February 15 

74

Project 7591, Report 2 1959 December 15 

74

Project 7591, Report, "Methods of Single Variable Diode Function Generation," by Richard C. Lee 

74

Project 7591, Charles Holmquest, MS Thesis, August 1957 1957 August 

74

Project 7668, J. F. Kaiser Correlation Computer Design Study 1957 March 

75

Project 7668, Report 1 1957 September 30 

75

Project 7668, Report 2 1957 September 

75

Project 7668, Report 3 1957 December 

75

Project 7668, Report 4 1957 

75

Project 7668, Report 5 Volume I undated 

75

Project 7668, Report 5 Volume II 1958 April 

75

Project 7668, Technical Memorandum 1 1958 March 31 

75

Project 7668, Technical Memorandum 2 1957 December 

75

Project 7668, Technical Memorandum 3 1958 April 

75

Project 7668, Technical Memorandum (master file) 1957 February 4 to December 19 

75

Project 7672, Technical Note 58-200 1958 September 

76

Project 7672, Technical Progress Report 1 1957-1958 

76

Project 7672, Technical Progress Report 2 1958 September to November 

76

Project 7793, Report 1 1958 January 

76

Project 7793, Report 2 1958 November 

76

Project 7793, Report 3 1959 February 

76

Project 7848-7849 Internal Progress Reports 1958 September to 1960 October 

77

Project 7848-7849, Report 1 1958 September 

77

Project 7848, Report 2 1958 October 

77

Project 7848, Report 3 1958 November 

77

Project 7848-7849, Report 4 1959 August 

77

Project 7848, Technological Memorandum 1 1958 July 

77

Project 7848, Technological Memorandum 2 1959 January 

77

Project 7848, Technological Memorandum 3 1959 May 

77

Project 7848, Technological Memorandum 4 1959 June 

77

Project 7848, Technological Memorandum 5 1959 July 

77

Project 7848-7849, Technological Memorandum 7 1960 February 

77

Project 7848-7849, Technological Memorandum 8 1960 April 

77

Project 7849, Report 1 1958 May 

77

Project 7849, Technical Memorandum 3 1960 November 

77

Project 7849, Technical Memorandum 6 1959 August 

77

Project 7849, Report 2, see 7849-R-9 

78

Project 7849, Report 3 1958 September 

78

Project 7848-7849, Report 4 1958 September 

78

Project 7849, Report 5 1958 December 

78

Project 7849, Report 6 1959 February 

78

Project 7848-7849, Report 7 1959 May 

78

Project 7849, Report 8 1959 June 

78

Project 7849, Report 9 1959 July 

78

Project 7849, Report 10 1960 August 

78

Project 7849, Report 11 1960 June 

78

Project 7849, Report 13, 14 undated 

78

Gordon Brown and Albert Hall, "Dynamic Behavior and Design of Servomechanisms"  circa 1940s 

79

G. T. Coate, "Differentiating Networks and Lead Networks"  1941 

7

"Manual of Schematic Diagrams and Standard Symbols Useful in Analyses of Hydraulic Servomechanisms"  1941 

79

George C. Newton, Jr., "Studies on Eletromagnetic Torque Motors Parts II-IV"  1942 

79

"Oil Gear Tests"  1942 

79

Donald Campbell, "Test Report on the Dawson 3-Piston Hydraulic Motors"  1942 

79

"Operating Instructioins for the Automatic Remote Control System for the XB 28 Airlplane"  1942 

79

"CXBL Radar Antenna Remote Drive Equipment Operating Instructions"  1943 

79

Henry A. Rose, "A Philosophy of Manual Control"  1943 

79

"Examination of Captured German Hydraulic Transmission"  1944 

79

"Operation and Alternation Instructions for Drive Controller T15"  1944 

79

"Forty Minute Mount Mark 3 Mod. 4 Description and Operating Instructions"  1945 May 

80

"Moment of Inertia Tests"  1945 August 10 

80

E. H. Bartelink, "Combined Optical and Radar Fire Control"  1946 

80

J. E. Ward, "Special Transformer Catalog"  1947 

80

R. J. Kochenburger, "Gunar Mark I Control System for Positioning and Stabilizing the Gun Mount in Train and Elevation"  1948 

80

P. D. Tilton and A. J. Parziale, "Characteristics of Some Magentic-Fluid Clutch Servomechanisms"  1949 

80

"Report on the Research Program Associated with the Servomechanisms Used on the MIT Differential Analyzer"  1950 January 9 and August 

80

Servo Lab Thesis list 1937-1950 

80

Electrodata Program print-out Operation Turmoil 1955 

80

NCCM bibliography 1957 

80

American Institute of Electrical Engineers confrence paper, J. F. Reintjes 1957 October 

80

Alfred K. Susskind, "Digital Information Processing for Machine Tool Control"  1957 

80

Proposals for Radar Project 1955-1958 

80

Project 6694, B drawings 

81

Project 6694, C and D drawings 

82

Project 6694, E drawings 

83

Project 6873, A, B, C, and E drawings 

84

Project 6873, Final Report 

85

Return to Table of Contents »


 Series 3. Computation Notebooks 1941-1959 

Box

Abbiati, O. (2 notebooks) 1946-1950 

1

Ahrendt, William R. 1942 

1

Albert, B. and Archer, G. R. 1954 

1

Albert, Brooke, Project 7002 (1-2 of 7 notebooks) 1955 

1

Albert, Brooke, Project 7002 (3-7 of 7 notebooks) 1955 

2

Albrecht, Project 6546 1947 

3

Archer, G. R., Project 7002 (3 notebooks) 

3

Archer, G. R. (1 enveleope) 

3

Armstrong, David E. 1953 

3

Arthurs, Edward, Project 6897 1952 

3

Baker, Arthur, Project 6506 1947 

3

Baker, Richard H. 1949-1950 

4

Barber, Basil, Project 6709 1949 

4

Bayle, Andrey, Projects 6097, 6168 (5 notebooks) 1942 

4

Bean, W. S., Project 6846 1951 

5

Bedrick, Jay M., Projects 6908, 7002 (2 notebooks) 1951, 1953 

5

Belles, Russel E., Project 7002 1953 

5

Biernson, George, Projects 6732, 7138 (2 notebooks) 1950-1956 

5

Biernson, George, Projects 6506, 6732, 7138 (3 notebooks) 1950-1956 

6

Bittenbender, R. A., Project 6546 (3 notebooks) 1947 

6

Biernson, G. and Shaw, R. 1951-1952 

6

Biernson, Brean, Shaw 1951 

7

Blaisdell, Robert M., Project 6547(?) 1945-1946 

7

Blanyer, Carl circa 1945 

7

Blechstein, A. A., Project 6546 

7

Booth, M., Project 6897 1952 

7

Bottum, E. L., Project 6546 1947 

7

Bourland, Hardy M., Project 7342 1956 

7

Bourland, Hardy M. (Thesis) 1957 

7

Bourland, Hardy M., Project 7342 1957 

8

Boynton, W. H., Project 7163 1945-1957 

8

Brean, John W. 1951 

9

Brean, John W. (6 notebooks) 1949-1958 

9

Brean, J. W. and Moore, G., Project 7668 1957-1958 

9

Brodie, A. C. (2 notebooks) 1947-1948 

9

Bromberg, Nathan S. 1959 

10

Brown, Melvin, Project 6506(?) 1943 

10

Bruce, R. A., Project 7976 1959 

10

Buckland, L. 1953 

10

Buckland, L., Project 7138 1953 

10

Burns, W. E. (2 notebooks) 1941-1942 

10

Campbell, Donald P., Project 5968 1940-1941 

10

Cameron, M., Project 6546 1947 

11

Centner, Ronald M., Project 7420 1956-1957 

11

Centner, Ronald M., Project 7405 1955-1957 

11

Childs, J. (2 notebooks) 1944 

11

Ciscel, Benjamin H., Project 6305 1945-1946 

11

Ciscel, Benjamin H., Project 6305 (1-2 of 3 notebooks) 1946 

11

Ciscel, Benjamin H., Project 6305 (3 of 3 notebooks) 1946 

12

Clements, Donald F., Projects 7002, 7138 (5 notebooks) 1950-1956 

12

Clements, Donald F., Project 8060 1960 

12

Clements, Biernson, Martini, Project 7138 1955 

12

Coate, G. 1941 

13

Cole, Frank B., Project 5000 1958 

13

Connelly, Mark E., Project 6694 1950-1951 

13

Connelly, Mark E., Project 6694 1951 

13

Connelly, Mark E., Project 7003 1951 

13

Crockett, R. G., Project 6506 1950 

13

Cronin, Frederick R., Project 6663 (Thesis); Project 7138 (7 notebooks) 1953-1956 

85

Cronin, F. R. and Brean, J. W. 1956 

14

Cutting, Elliot 4 1952-1954 

14

Dalrymple, S. W., Project 6546 1947 

14

Delagrange, Art 

14

DiPillo, Alfred N., Project 6683 1950 

14

Eaton Jr., Carleton G., Projects 6469, 6506, 6345 (5 notebooks) 1946-1948 

15

Eberly, David, Project 6305 1946 

15

Edwards, E. A., Project 5955-A 1941-1944 

15

Edwards, Robert S., Thesis (2 notebooks) 1941 

16

Eisengrein, R. H., Project 6506 (4 notebooks) 1947-1949 

16

Evanzia, Project 7002 (2 notebooks) 1953 

17

Everett, Robert R., Project 6295 1945 

17

Feingold, R. M., Project 6546 (2 notebooks) 1947-1948 

17

Fiore, John M., Project 6546 (2 notebooks) 1947-1949 

17

Fischer, Donovan G., Project 3845 (Thesis) 1955-1956 

17

Fischer, Donovan G., Project 7138 (Thesis); Project 7002 (4 notebooks) 1954-1956 

18

Fitts, R. E., Project 7002 (1-2 of 3 notebooks) 1953-1954 

18

Fitts, R. E., Project 7002 (3 of 3 notebooks) 1953-1954 

19

Fitzmorris, M. J., Projects 7002, 6908 (5 notebooks) 1951-1955 

19

Foote, Earle G., Projects 6305, 6469 (2 notebooks) 1946-1947 

20

Floyd, G. F. (2 notebooks) 1950 

20

Foy Jr., W. H., Project 7138 (Thesis) (3 notebooks) 1953-1955 

20

Frey, Hugh B., Project 6663 1949 

20

Fuller, R. H. 1954-1955 

21

Gardiner, Kenneth W. (2 notebooks) 1952-1954 

21

Gehman, Philip A., Project 7424 1956 

21

Goldberg, Edwin Allen, Thesis 1956 

21

Gottling, James G., Project 7002 1954-1956 

21

Grafinger, Louis N. (1 of 3 notebooks) 1946 

21

Grafinger, Louis N. (2-3 of 3 notebooks) 1946 

22

Gray, Henry, Project 6546 (2 notebooks) 1947-1948 

22

Grim Jr., William H., Project 6986 (3 notebooks) 1947-1948 

22

Grim Jr., William H., Project 6986 (2 notebooks) 1949-1954 

23

Grohe, Project 6546 1947 

23

Grossimon, H. P., Project 7163 1954 

23

Guinesso, Louis M., Project 6043 1943 

23

Hadden, F. A., Projects 6546, 6663 (3 notebooks) 1947-1950 

23

Hadden, F. A., Project 6506 1947-1950 

24

Hamara, Oma, Project 6897 1953 

24

Hamilton, Dorothy A., Project 6506 (2 notebooks) 1950 

24

Hedgren, S., Project 6546 1947 

24

Herzberg, Ernst, Projects 6770, 7138, 7163 (3 notebooks) 1951-1955 

24

Heuchling, Theodore P., Projects 6383, 6683, 6613, 6770 (6 notebooks) 1946-1948 

25

Hillier, Bob, Project 6846 

25

Hills, Frank B., Project 7163 1954-1955 

25

Hills, Frank B., Project 7138 1956 

26

Hoedemaker, Robert W. 1954 

26

Hoge, Robert R., Project 7138 (1-5 of 7 notebooks) 1954 

26

Hoge, Robert R., Project 7138 (607 of 7 notebooks) 1954 

27

Hollander, G. L. 1952 

27

Holt, Charles C., Projects 6256, 6305, 6234 (7 notebooks) 1944-1945 

86

Holt, C. C. and Sammons, W. L., Project 6117 (2 notebooks) 1943 

27

Hrones, John A., Project 6248 1943 

27

Hutchinson, F. C., Project 6219(?) 1944 

27

Ivaska, J. P., Project 6666 1949 

27

Ivaska, J. P., Project 6546 (2 notebooks) 1949 

28

Ivaska, J. P., Projects 6383, 6546 (2 notebooks) 1947-1948 

28

Jeffers, Bill, Project 8822 1961 

28

Johnson, W. X., Thesis (2 notebooks) 1954-1955 

28

Jones, A. 1953 

28

Jones, W. H., Project 6546 1947 

28

Jordon, Rolando, Project 7848 (2 notebooks) 1958 

29

Jursik, Jim, Project 6506; Thesis (4 notebooks) 1951-1953 

29

Jursik, Jim, Projects 6506, 7138 (5 notebooks) 1952-1954 

30

Kaiser, James F., Projects 7002, 6908, 7424 (5 notebooks) 1954-1957 

31

Kalman, Rudolf E., Project 6897; Thesis (2 notebooks) 1953 

31

Kapp, Edward, Project 7668 1957-1959 

32

Kapp, Edward, Project 7848 (3 notebooks) 1957-1959 

32

Katz, M. D. 1954 

32

Kawecki, Zen, Projects 7163, 6897 (3 notebooks) 1954-1955 

32

Kellner, Richard, Project 7002 1952 

33

Kelly, Raymond S., Project 6546 1948 

33

Kelly, Raymond S., Project 6383 (2 notebooks) 1945-1947 

33

Kilroy, Henry P., Project 7163; Thesis (1-3 of 4 notebooks) 1955-1956 

33

Kilroy, Henry P., Project 7163; Thesis (4 of 4 notebooks) 

34

King, L. A., Project 6546 1947 

34

Kleinrock, Leonard, Thesis 1957 

34

Kletsky, Earl J., Thesis 1953 

34

Kochenburger, Ralph, Project 6383 (2 notebooks) 1946 

34

Kolodkin, Stanley S., Project 6897 1954 

34

Koso, Alexander, Project 7668 1957 

34

Krasinski, J. and Martin, L. H., Project 6897 (2 notebooks) 1952 

35

Kreitner, F. 1954 

35

Laspina, Christopher A., Thesis (2 notebooks) 1956 

35

Lassiter, Eddie M. (2 notebooks) 1958 

36

Leary Jr., Timothy, Project 6043 1944 

36

Lee, Francis F., Project 7163 (2 notebooks) 1953-1954 

36

Leith 1959 

36

Lee, Robert E., Project 7591 (5 notebooks) 1952-1958 

37

Leonard, R. R. (2 notebooks) 1954 

37

Lynch, Thomas J., Project 7848 (4 notebooks) 1957-1958 

38

MacArthur, John (4 notebooks) 1957-1958 

38

Mahoney, Project 6546 1947 

39

Maia, G., Project 7420 1956 

39

Malcolm, J. G., Project 6986 (2 notebooks) 1953-1954 

39

Maples, T. Kemp (4 notebooks) 1947-1948 

39

Marcy, H. Tyler, Projects 6041, 5955, 6143, 6152 (7 notebooks) 1941-1943 

40

Marcy, H. Tyler, Projects 6256, 6288 (5 notebooks) 1941-1943 

41

Mark, Robert B., Project 7138 (2 notebooks) 1955 

41

Mark, Robert B., Project 7138 (2 notebooks) 1956 

42

Marsh, J. Myron 1954 

42

Martin and Kramer 1951 

42

Martin, Louis Holt, Project 6897 (2 notebooks) 1949-1950 

42

Martin, Louis Holt, Project 6897; Thesis (4 notebooks) 1950-1954 

43

Martin, Louis Holt, Project 6897 1954 

44

Martini, Donald S., Projects 6351, 7002 (2 notebooks) 1952-1955 

44

McDonald, D., Projects 6152, 6245 (4 notebooks) 1942-1945 

44

McDonald, D., Projects 6256, 6301, 6305, 6043 (6 notebooks) 1942-1945 

45

McDonough, J. O., Thesis; Project 6469 (2 notebooks) 1946 

45

McDonough, J. O., Projects 6469, 6506, 6546, 6683 (5 notebooks) 1946-1949 

46

Menger, Karl Stephan, Project 7849 1959 

46

Miller, H. L., Project 6546 1947 

46

Miller, Ralph, Project 7002 (2 notebooks) 1958 

46

Moeller, Project 6546 1947 

47

Monks, Leo E. (4 notebooks) 1946-1951 

47

Moore, Henry, Project 6555 1948 

47

Moore Jr., Garvin M., Projects 7138, 7668 1956 

47

Morgenstern, John, Projects 7062, 7002 (6 notebooks) 1953-1954 

48

Morin, John O., Projects 7108, 7163 (3 notebooks) 1953-1954 

49

Mozer, Frank, Project 6383 1946 

49

Mullin, Frank J., Project 7138(?) (2 notebooks) 1955 

49

Munro, Project 6546 1948 

49

Newberg, Irwin L., Project 7848 (2 notebooks) 1958 

49

Newberg, Irwin L., Project 7848 (3 notebooks) 1959 

50

Newton Jr., George C. (2 notebooks) 1940-1942 

50

Nickerson, Ernest G., Project 6409 1945 

50

Nordahl, J. G. 1954-1955 

50

Notthoff, A. P., Project 6506 (2 notebooks) 1948 

87

Ojalvo, Project 7405 1956 

87

Osman, Martin S. 1954 

87

Osman, Martin S. 1955 

87

Osman, Martin S. (2 notebooks) 1956 

87

Osman, Martin S. 1957 

88

Osman, Martin S. 1958 

88

Osman, Martin S., Thin Film Project 1958 

88

Osman, Martin S. 1959 

88

Osman, Martin S. (2 notebooks) 1960 

88

Ostrom, C. D. and Smolensky, S. M., Thesis 1947 

51

Page, Frank D. (2 notebooks) 1945-1946 

51

Paine, Charlotte J., Project 6295 1945 

51

Parker, Ted, Project 7002 1957 

51

Parziale, Alfred J., Project 6506 (2 notebooks) 1948 

51

Payson, Eliot C., Project 6152 1943 

51

Pearl, Max, Project 6288 (3 notebooks) 1944-1945 

52

Pease, Will, Projects 6170, 6168 (5 notebooks) 1943-1945 

52

Perley, Dick, Projects 6506, 6683 (3 notebooks) 1949-1950 

53

Pettler, P. R., Project 7163 1953 

53

Preston, John L., Project 6897 (3 notebooks) 1952-1953 

53

Proakis, John (1 of 2 folders) 1959 

53

Proakis, John (2 of 2 folders) 1959 

54

Prohaska, E. S., Projects 6655, 6288, 6383 (3 notebooks) 1945-1949 

54

Prohaska, E. S., Projects 6219, 6506, 6345 (2 notebooks) 1945-1949 

54

Prugh, Richard W., Project 7002 1954 

54

Rand, Albert, Project 7002 (2 notebooks) 1953-1954 

55

Raymond, M. W., Project 7138 1954 

55

Reeves, John F., Projects 6288, 6294, 6333 (3 notebooks) 1944-1946 

55

Reeves, John F., Projects 6342, 6305, 6409 (2 notebooks) 1945-1946 

55

Reeves, John F., Projects 6047, 6117, 6145, 6208 (3 notebooks) 1942-1944 

56

Reeves, John F., Projects 6342, 6305, 6409 (2 notebooks) 1945-1946 

56

Relyea Jr., Project 7405 1956-1957 

56

Replogle Jr., Frank, Project 6663 1951 

56

Replogle Jr., Frank, Project 6663 (4 notebooks) 1951-1953 

57

Roberts, Roy, Projects 6546, 6383 (3 notebooks) 1947-1948 

57

Roberts, Roy, Project 6546 1947-1948 

58

Rosen, Sidney, Project 6245 (2 notebooks) 1944-1945 

58

Ruhman, Smil 1956 

58

Runyon, J. H., Whirlwind I (1-3 of 4 notebooks) 1951-1953 

58

Runyon, J. H., Whirlwind I (4 of 4 notebooks) 1951-1953 

59

Runyon, J. H., NCMM, Computing Survey (2 notebooks) 1954 

59

Salvatore, Michael, Project 6219 (2 notebooks) 1944 

59

Salvatore, Michael, Projects 6219, 6305 (3 notebooks) 1944 

60

Samario, Edward J. (2 notebooks) 1950-1951 

60

Santangelo, J., Project 6546 1947 

60

Savitt, D., Thesis (Circuits) (1-2 of 5 notebooks) 1957 

60

Savitt, D., Thesis (Circuits) (3-5 of 5 notebooks) 

61

Schreiner, Kenneth E., Project 6409, 6305, 6469 (3 folders) 1945-1946 

61

Schwartz, George J., Projects 6234, 6295 (1-4 of 8 notebooks) 1942-1944 

61

Schwartz, George J., Projects 6234, 6295 (5-8 of 8 notebooks) 1942-1944 

62

Schwartz, George J., Torque Test Data 1942-1943 

62

Seaver, Bill, Project 6506 1951 

62

Shairman, Alvin H. 1945-1946 

62

Shapiro, Allan D., Project 6288 1945 

63

Shaw Jr., Richard, Project 6506 (3 notebooks) 1951-1953 

63

Shechet, Morris L., Thesis; Projects 6846, 7003 (3 notebooks) 1951-1953 

63

Shechet, Morris L., Projects 6908, 7002 (2 notebooks) 1951-1953 

64

Shechet, Morris L., Project 6908 circa 1951 

64

Sifferlen, Tom, Project 6897 1953-1954 

64

Silvey, J. O. and Reeves, J. F., Project 6152 1943-1944 

64

Silvey, J., Prohaska, E., and Fiore, J., Project 6655 1949 

64

Simons Jr., John C., Project 6908 1952 

65

Smith, B. S., Project 6546 1947 

65

Smith, Mary Buck; Project 6305 (3 notebooks) 1945-1946 

65

Smith, Mary Buck; Project 6305 (2 notebooks) 1946-1947 

65

Smith, Mary Buck, Project 6305 (1 of 2 notebooks) 1947 

65

Smith, Mary Buck, Project 6305 (2 of 2 notebooks) 1947 

66

Smith Jr., Paul E., Project 7976 (2 notebooks) 1958 

66

Spencer, Richard H., Project 6663 (3 notebooks) 1950-1951 

66

Spencer, Richard H., Project 6986 (1 of 3 notebooks) 1952-1953 

66

Spencer, Richard H., Project 6986 (2-3 of 3 notebooks) 1952-1953 

67

Spencer, Richard H., Project 6986 1954-1955 

67

Spencer, Richard H., Project 7138 (3 notebooks) 1955-1956 

67

Spencer, Richard H., Project 7668 (2 notebooks) 1957 

67

Spencer, R. H. and Clemments, D. C., Project 7668 1957 

67

Spicer Jr., William C., Project 6663 1951 

68

Stallard, David V., Projects 6506, 7138 (3 notebooks) 1953-1954 

68

Stallard, David V., Project 7138 (3 notebooks) 1954-1955 

68

Stallard, David V., Projects 7138, 7444 (3 notebooks) 1955-1956 

68

Steinhauer Jr., Henry, Project 6152 1943 

69

Stoft, Paul, Project 7138 (2 notebooks) 1954 

69

Subbotin, Boris T. 1953 

69

Sullivan, W. E., Project 6305 (2 notebooks) 1946-1947 

69

Susskind, A. K. 1952 

84

Susskind, A. K. 1953-1954 

84

Sussman, S. M. 1954 

84

Swartwout, C. J., Projec t 6305 (2 notebooks) 1945 

70

Swainson, W. H., Project 6383 1945 

70

Tancrell, Roger H., Project 7138-R 1956 

70

Tarjan, Peter 1959-1960 

70

Taylor, A. J., Project 6295 1945 

70

Terwilliger, D. D., Project 6145 1943 

70

Terwilliger, D. D., Project 6383 1945 

71

Thiessen, Peter I., Phase Shifting (3 notebooks) 1946-1947 

71

Thornton, Richard D., Project 6506 1953 

71

Tilton, P. D., Projects 6469, 6545 (2 notebooks) 1947 

71

Tilton, P. D., Project 6506 (2 notebooks) 1948-1949 

72

Tone, F. F., Projects 6047, 6219, 6234 (2 notebooks) 1942, 1944 

72

Tone, F. F., Projects 6383, 6309, 6310 (2 notebooks) 1945 

72

Tone, F. F., St. Jean, L., and Navin, R., Project 6047 1942 

72

Travers, Paul, Projects 6305, 6383 (2 notebooks) 1945-1947 

72

Travers, Paul Project 6383 (5 notebooks) 1947-1950 

73

Tressler, R. R., Project 6546 1947 

73

Troop Jr., H. W., Project 6295 1945 

73

Troutman, L. E., Project 6383; Thesis (2 notebooks) 1945-1946 

74

Truesdale, C. N., Project 6546 1947 

74

Tuller, W. G., (Automatic Control) 1946 

74

Uhl, R. J., Project 7668 1957-1958 

74

Van Horn Jr., Irving H., Projects 6041, 6152 (3 notebooks) 1942-1943 

74

Van Horn Jr., Irving H., Project 6219 1944 

75

Van Horn Jr., Irving H., Projects 6219, 6337, 6305 (3 notebooks) 1944-1945 

75

Van Horn Jr., Irving H., Project 6219 (3 notebooks) 1945 

75

Vannah, W. E., Project 6545 1947 

75

Van Renne, A. B., Project 6663 1950-1954 

76

Van Renne, A. B., Project 6663 1954 

76

Vinal Jr., Albert W., Project 6506 1948 

76

Vinal Jr., Albert W., Project 6506 1949 

76

Vinal Jr., Albert W., Project 6663 1950 

76

Vinal Jr., Albert W., Project 6506 1953 

76

Vinal Jr., Albert W., Project 7138 (3 notebooks) 1954 

77

Voci, H. M., Project 6546 1947 

77

Walcott, Permilla, Project 6288 1943 

77

Walcott, Permilla, Project 6234 1944 

77

Walcott, Permilla, Projects 6288, 6305 (3 notebooks) 1944-1945 

78

Walcott, Permilla, Project 6288 1945 

78

Ward, J. E., Project 6305 1947 

78

Ward, A. G. and Hooper, E. B., "Special Project"  1940 

78

Warshaw, Stanley W., Project 6152 1943 

79

Warshaw, Stanley W., Project 6152 1944 

79

Watson, J. K., Project 6986 1953-1955 

79

Welch, J. D., Project 6694 1959-1960 

79

Whitehouse, David R., Project 6986 1952 

79

Whitehouse, David R., Project 6986 (2 notebooks) 1953 

80

White, G. W. and McDonald, Donald, Project 6047 1942 

80

White, Harris F., Project 6546 1947 

80

Whitley, James H., Project 6916 1951 

80

Wieser, C. R., Projects 6074, 6145 1942 

80

Wieser, C. R., Projects 6152, 6208, 6219 1943 

81

Wieser, C. R., Project 6305 1945-1946 

81

Wieser, C. R., Project 6305 1946 

81

Wieser, C. R., Project 6469 1947 

81

Wood, J., Project 7002 1954 

81

Yarborough, J. D., Project 6288 1945 

81

Young, Mina S., Project 6378 1945 

81

Young, Mina S., Projects 6305, 6383 1946-1947 

82

Young, Mina S., Projects 6383, 6506 1947 

82

Young, Mina S., Project 6506 1947 

82

Zabusky, Norman, Project 6383 1947 

82

Zabusky, Norman, Project 1950 

82

Zabusky, Norman, Project 1951 

82

Zabusky, Norman, Project 6897 1951 

83

Zabusky, Norman, Project 6506 1951 

83

Zabusky, Norman, Project 6897 (1-2 of 3 notebooks) 1952 

83

Zabusky, Norman, Project 6897 (3 of 3 notebooks) 1952 

84

Zabusky, Norman, Project 6897 1953 

84

Return to Table of Contents »